Originally Posted by
Peter Pig
Have you tried a smear of vaseline round the seal,it works a treat on my B96.
Yes I did try that after a previous recommendation (might of been yourself) but no joy. The sealing arrangement is a curios design, an o-ring fairly loosely within a groove, sliding inside a tapered tube.; it must be highly dependent on the sliding interference fit. The seal must be made before the C02 punchuresd otherwise it could blow out/distort the seal. The OEM seals are quite soft and easily get pushed out of shape, on mine it used to leak straight off, or after one shot.
The polyurethane seals are much more robust and secure and worked perfectly in my Tau 7; maybe there is some variability in the internal tube diameter.
Treat Others As You Would Wish To Be Treated.