Rekord trigger HW97K

[Jimbob 2705]

And when putting it back in cock the trigger unit first.

Out of interest, why do you need to do this?

On all of the 97's I've stripped I've never needed to cock the trigger unit first?

[I. J.]

He he he, I think we have all done that at one time or another.

You soon remember though.
Neil

Thank God it hasn't been just me. I took the action out of the stock and only realized as I was tapping the pins out and the trigger fired

Cheers!

No issues with the pins falling out later?

Just relieve them until they are finger tight. They cant go far in the stock anyway. What can do a runner is the hollow dowels (and safety catch spring) in the trigger side plates.

Out of interest, why do you need to do this?

On all of the 97's I've stripped I've never needed to cock the trigger unit first?

Its just easier not to be working against the top sear spring pressure.

HTH
Ian

[vobster]

Out of interest, why do you need to do this?

On all of the 97's I've stripped I've never needed to cock the trigger unit first?

Easier to line it all up. I cock the unit, look through the side pin holes to line up, push the safety half way in, put the pins in and then pull the trigger. If you forget to pull the trigger it wont cock first time.

[I. J.]

Easier to line it all up. I cock the unit, look through the side pin holes to line up, push the safety half way in, put the pins in and then pull the trigger. If you forget to pull the trigger it wont cock first time.

I do this over a white paper or cloth.

[boozybloke]

I wish I'd seen this thread at the weekend while I was working on my 97..
cock trigger unit; will remember that for next time (and save on my weekly quota of swear words)