Quote Originally Posted by bezzer View Post
As you say it's a waste of time trying to reg an Air Arms without removing the anti tamper. I used a mill to do my 400 and HFT so it could be drilled spot on and wouldn't attempt it any other way to avoid other damage. Adjusters removed and blanked off so everything is altered by spring and hammer settings so other than completely stripping it down and swopping parts you can't alter the power. The only way power can raise is through temperature and being set at 11.3 fpe it should still stay below, or if the reg fails letting more air through which would show on the gauge.
If the reg fails and lets more air through isn't it likely the power will drop? The hammer isn't used to taking on such resistance......

... and there's a tool that sounds like LEMERD that can be quite useful in sawcutting a screwdriver slot, anywhere you find it necessary. Needs care though.