FX verminator mk2

[Rich]

Mine fits me like a glove, but plenty of club members struggle and say the scope needs to be on taller mounts.

The magazine is fiddly to load, not so bad once you have the knack.

Don't fire it without the air bottle fitted, the hammer can push the valve too far when there is no air pressure to overcome. Easy to bend the valve stem and then it sticks.

[madcarlos]

Mine fits me like a glove, but plenty of club members struggle and say the scope needs to be on taller mounts.

The magazine is fiddly to load, not so bad once you have the knack.

Don't fire it without the air bottle fitted, the hammer can push the valve too far when there is no air pressure to overcome. Easy to bend the valve stem and then it sticks.

Funny enough I had raised blocks under my mounts, But I've also had them fitted to a couple of other guns,

[bufo]

I had one and although accurate its tricky to get ideal cheek weld and head position for the scope. I had a viper connect on my mk1 and this was never an issue with the short eye relief, but the big sticky-up magazine makes this a difficult scope to fit on the mk2. If you are going to buy one I would suggest shooting it a bit first if that is possible to make sure that you can get it to fit you.

[p.j.]

I had one for a couple of days, sold it because like others have said I just couldn't get comfortable with it. Quite a chubby thing to.