question nick .if fitting mk2 action in mk1 stock you have you have remove 2mm from back of stock.but if you measure the main mk1 receiver hole it is a 100mm from the back of action.the mk2 is 105mm mm from back of action
question nick .if fitting mk2 action in mk1 stock you have you have remove 2mm from back of stock.but if you measure the main mk1 receiver hole it is a 100mm from the back of action.the mk2 is 105mm mm from back of action
Isn't the mk1 trigger blade a diffrent length to a mk2 ?
I thought it needed some kind of mod to make it fit ?
if i remember right from my previous mk1, i had the mk2 stock fitted and i think the trigger blade was too short. easy sorted with a shoe
may be wrong though
john
Trustworthy Traders: KevG, BONNIE & CLYDE, Rapidnick, andy_ls26, pbranthwaite, SCCS, GerryG, ChrisW6, pip123, lee.williams, highlandwarrior, loiner1965, HandyAndy, dickieboy, u.k.neil, Coney, BunnyHunter, g60bv, Bob.JS, BuddyBoy, minibbb, O'ringer, Bellycrawler, Whizzer, davegee59, markm, ja69one, whiteleggHW77K, REEVES, sailingtessa, BuzzLightyear, Dougie_fn12, dpm, zooankski, snoozlecracker, Snapshot, el maipino, rapid phil, Kenadams, davidkew - Thanks Guys!
i have a mk2 stock on my mk1 regulated action,with trigger shoe fitted as low down on th blade as possible.it all works fine.even the safety catch is ok.
rapid 7 mk2 .22/btas 30ftlbs fac./fx verminator 177
rapid 17 mk1 regged(by ben taylor)in mk2 stock
savage hmr and dm80 mod/ crickett .22