Kral puncher breaker synthetic bullpup

[peddy]

Club mates is also clipping screw on muzzle thingy. Weird thing with it removed it scatters pellets for 20 shots then it shoots spot on for the rest of the time until you fill it again.doesnt matter what pressure you fill it to etc. Any ideas how this is happening. Surely if it's the barrel, pellet etc it would be crap all the time??

[secretagentmole]

Club mates is also clipping screw on muzzle thingy. Weird thing with it removed it scatters pellets for 20 shots then it shoots spot on for the rest of the time until you fill it again.doesnt matter what pressure you fill it to etc. Any ideas how this is happening. Surely if it's the barrel, pellet etc it would be crap all the time??

Regulator problem?

[Squirreler]

Put quite a lot of pellets through the Kral recently using the single shot tray and it seems to be starting to group. I also shortened the initial trigger movement by tightening the nylock nut on the trigger rod slightly which seemed to help. I have an idea that when using the magazine, as the probe starts to push the pellet into the bore the magazine starts to index and clips and damages the pellet skirt producing the scattered shots. Its been very windy here so not been able to do any further testing, seems to be calming down now.

Cheers, Phil