PP700W pistol

[Jesim1]

I went out and bought one yesterday and had a go at setting it up today.

I can't see the link about trigger fettling?, can someone repost it please?

I did set the trigger to it's lightest adjustment which improved things, and I turned the power down to around 4 as I seem to be having trouble zeroing it with the red dot sight I got with it. It's probably me though, I know how to zero things, but the groups are just way to big, but as I'm not used to pistols it's frustrating seeing other peoples groups and them saying how accurate it is.

I tried resting it on my arm and got better results, but resting either the cylinder or fore grip on the back of a soft chair was rubbish, it looked like it was not moving, but the groups would suggest it was kicking up, but you could not see it?

Does anyone have any tips for an effective rest for zeroing, I get it that I will never be able to do it accurately freehand.

Thanks

[Aimstraight]

Not sure about this particular pistol, but the Caldwell Hunters Blind Bag works well (bay item....311460202506), or a DIY equivalent for initial setting up pistols/rifles. After that it's freehand...which is where the fun starts with either muzzle flip or poor technique or both!

[Tony.T]

What pellets are you using? Mine likes AA/JSB 8.4 grainers the best.

Just a thought (and I may be wrong) but 4 ft.lbs may be a bit too low as the pellet will take fractionally longer to leave the barrel and may add to inaccuracy. Something else I did while I had it apart was to polish the hammer spring strut and lube the spring lightly in a bid to shorten lock time.

Trigger fettling is down to removing the trigger and sear and polishing the contact surfaces, but be aware the small coil springs used are a complete pita to get in the right place afterwards! But worth doing as it does make a difference!

[Jesim1]

I'm guessing it's just low experience with pistols, so I've not even got as far as pellet testing, I'm just using Accupells for now, I reconed at 6m it would be a negligible difference. As for power, I thought more kick from 5.5fpe, so turned it down for better shot count and lower recoil/hammer action.

It's my first pistol but I've been using PCP rifles for a couple of years now.

James

[Tony.T]

Doubt if any kick will make any difference as the pistol is fairly front heavy. Do persevere with it as I'm sure you'll be delighted with it once it's fettled to your taste and you've had experience shooting it. As for me I'm somewhat in awe of it, very impressed.

[rockdrill]

Does anyone have any tips for an effective rest for zeroing, I get it that I will never be able to do it accurately freehand.

One nice point about the PP700 is that you can get 95% of the way to being zeroed by bore sighting it as with the breech-block in the open position and the hammer cocked you can see straight through the bore.

With the pistol in a solid rest line the bore on the target and adjust your sight to intersect what the bore is pointing at.

Keeping your groups tight just comes down to practice.

[forbs]

first mod to the gun new weihrauch barrel, screw cut for a moderator its almost silent

http://i423.photobucket.com/albums/p...psyipddinx.jpg

http://i423.photobucket.com/albums/p...psi0xfyvqv.jpg

with weihrauch silencer

http://i423.photobucket.com/albums/p...psppocsrmw.jpg

[Waisted]

Well I picked up my second pp700 on Friday afternoon from Guns and Roses in Dewsbury, this time I got a .177 to match the .22 . To say that I am happy is an understatement these pistols are the dogs bollocks and a great price at £150 each. Also picked up a couple off decent shirts for a good price, a good little gun shop if ever you are in the area.

[buttloaves]

http://i1128.photobucket.com/albums/...oors%20121.jpg
http://i1128.photobucket.com/albums/...oors%20122.jpg

Fitted with Crosman stock, makes a great little ratter.

[buttloaves]

http://i1128.photobucket.com/albums/...oors%20121.jpg
http://i1128.photobucket.com/albums/...oors%20122.jpg

Fitted with Crosman stock, makes a great little ratter.

Ive said this before, if SMK could deliver this gun with plastic stock, slightly longer barrel, sub 12fpe, under £300 they'd have a winner..

[Waisted]

Butt loaves did you have to do much alteration to make it fit the crosman stock? I have made a thumb hole stock for my .22 it helps to give it good accuracy, it is far superior to the small brocock rifle That I got rid of.Infact I would say it's better than quite a few rifles that I have had, so simple and easy to work on. Thankfully I had an air cylinder otherwise these pistols would have passed me by, they have reignited my fun button.

[titeuf007]

first mod to the gun new weihrauch barrel, screw cut for a moderator its almost silent

http://i423.photobucket.com/albums/p...psyipddinx.jpg

http://i423.photobucket.com/albums/p...psi0xfyvqv.jpg

with weihrauch silencer

http://i423.photobucket.com/albums/p...psppocsrmw.jpg

dear forbs
could you say me if it s 16mm hw barrel?
i would like to make the same thing than you
do you obtain better accuracy?

[titeuf007]

first mod to the gun new weihrauch barrel, screw cut for a moderator its almost silent

http://i423.photobucket.com/albums/p...psyipddinx.jpg

http://i423.photobucket.com/albums/p...psi0xfyvqv.jpg

with weihrauch silencer

http://i423.photobucket.com/albums/p...psppocsrmw.jpg

do you use 16 od hw barrel.?
i would like to buy one but there are 2 sizes..16 or 14mm