Page 1 of 2 12 LastLast
Results 1 to 15 of 49

Thread: Using WD40 on air rifles.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2013
    Location
    worthing
    Posts
    3,333
    Quote Originally Posted by madcarlos View Post
    Myself i always give a squirt down the port hole of my 177 77k , just a little then decocked the gun and half pulled on the under lever a couple times and then left over night if I went shooting the morning after
    I take it you'd get a few supersonic shots from that little routine....

  2. #2
    Join Date
    Apr 2017
    Location
    Thetford
    Posts
    11
    The main thing to watch for is seals. If you leave it on them it can cause them to fail.

  3. #3
    Join Date
    Jun 2015
    Location
    wigan
    Posts
    123
    Quote Originally Posted by Prometheus2017 View Post
    The main thing to watch for is seals. If you leave it on them it can cause them to fail.
    Yeah dead right.
    I've been an engineering manager for over 30 yrs and while WD40 has it's uses on externals never allow it to penertrate the internals. Complex pneumatic valves in high speed production machinery was very often ruined when WD40 was used as an easy fix for sticking valves. It destroys air seals very quickly.
    Air Arms HFT 500. HW100 FSB. HW99 (.22) HW99 (.177) HW30 (.177) HW97K (.177) Gamo GX40 (.22)

  4. #4
    Join Date
    Dec 2012
    Location
    Bromsgrove
    Posts
    870
    Quote Originally Posted by Sallyannsnow View Post
    Yeah dead right.
    I've been an engineering manager for over 30 yrs and while WD40 has it's uses on externals never allow it to penertrate the internals. Complex pneumatic valves in high speed production machinery was very often ruined when WD40 was used as an easy fix for sticking valves. It destroys air seals very quickly.
    no small wonder really ....it has cutting agents in it for the purpose of degreasing.

  5. #5
    Join Date
    Nov 2014
    Location
    beckenham
    Posts
    622
    Personally.... I just love the smell of it. I had an aunt who used to spray her arthritic hip evey day with it convinced that it was doing her good. She was (of course) barking mad.

  6. #6
    Join Date
    Jan 2010
    Location
    southampton
    Posts
    3,105
    Quote Originally Posted by chieffool View Post
    Personally.... I just love the smell of it. I had an aunt who used to spray her arthritic hip evey day with it convinced that it was doing her good. She was (of course) barking mad.
    Lmao...there may well be a nugget of truth in that,wd40 was iirc made from fish oil many many moons ago,a sort of 'cod liver oil' in an aerosol
    Smile!...today is the day you worried about yesterday. :-)

    Supanova II Weymouth....http://www.supanova-charters.co.uk/

  7. #7
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    Quote Originally Posted by weebster View Post
    Lmao...there may well be a nugget of truth in that,wd40 was iirc made from fish oil many many moons ago,a sort of 'cod liver oil' in an aerosol
    fish oil ? nope

    What a Fish story!
    Myth: WD-40® contains fish oil.

    Fact: Consumers have told us over the years that they have caught some of the biggest fish ever after protecting their fish hooks and lures with WD-40®. We believe this legend came from folks assuming that the product must contain fish oil since it appears to attract fish. Sorry Charlie®, it just ain’t so.
    WD-40 Company has taken steps to respect and conserve the environment, and encourages its users to do the same. While WD-40® can be used to help protect fishing equipment from rust and corrosion, WD-40 Company does not recommend using WD-40® to attract fish.

    “WD-40® Cures Arthritis!” No Way.
    Myth: WD-40® cures arthritis.

    Fact: This popular headline, appearing at least once a year in the tabloids, is completely FALSE. WD-40 Company does not recommend the use of WD-40® for medical purposes, and knows no reason why WD-40® would be effective for arthritis pain relief. WD-40® contains petroleum distillates and should be handled with the same precautions for any product containing this type of material

  8. #8
    Join Date
    Jan 2007
    Location
    Plant City FL, 22 miles east of Tampa
    Posts
    1,453
    Quote Originally Posted by chieffool View Post
    Personally.... I just love the smell of it. I had an aunt who used to spray her arthritic hip evey day with it convinced that it was doing her good. She was (of course) barking mad.
    Actually had a doctor tell us that it works for joint pains. It has a chemical that allows it to penetrate the skin. Has a long name, but it well know by it's anagram. I just can't remember the 4 letters.

  9. #9
    Join Date
    Dec 2015
    Location
    Cambridge
    Posts
    486
    There are better penetrating sprays out there but they are not as easy to get hold of.
    I used to use them to free testing ports on power station stacks, very rusty and had been very hot.
    But I have been using dw40 to clean inside the barrels recently seems good.

  10. #10
    Join Date
    Feb 2007
    Location
    Lytham St. Annes
    Posts
    6,664
    Quote Originally Posted by fpoole View Post
    actually had a doctor tell us that it works for joint pains. It has a chemical that allows it to penetrate the skin. Has a long name, but it well know by it's anagram. I just can't remember the 4 letters.
    rpca?
    Happy Shooting!! Paul.
    "We cannot solve our problems with the same thinking that we used when we created them" - Albert Einstein.

  11. #11
    Join Date
    Aug 2015
    Location
    manchester
    Posts
    7,674
    For all that matters the main ingredient in WD 40 is apparently Fish Oil. Make of it what you may.

    A.G

  12. #12
    Join Date
    Feb 2007
    Location
    Lytham St. Annes
    Posts
    6,664
    Quote Originally Posted by lensman57 View Post
    For all that matters the main ingredient in WD 40 is apparently Fish Oil. Make of it what you may.

    A.G
    This is copied directly from WD 40's own web site - no third party input:ns

    Myth:WD-40® contains fish oil.

    Fact: Consumers have told us over the years that they have caught some of the biggest fish ever after protecting their fish hooks and lures with WD-40®. We believe this legend came from folks assuming that the product must contain fish oil since it appears to attract fish. Sorry Charlie®, it just ain’t so.
    came from folks assuming the product must contain fish oil since it appears to attract fish. Sorry Charlie®, it just ain’t so.
    Happy Shooting!! Paul.
    "We cannot solve our problems with the same thinking that we used when we created them" - Albert Einstein.

  13. #13
    Join Date
    Jul 2007
    Location
    aylesbury, bucks
    Posts
    122
    Quote Originally Posted by Prometheus2017 View Post
    The main thing to watch for is seals. If you leave it on them it can cause them to fail.
    For what it's worth I once experimented by leaving an O-ring soaking in WD40 for a month.
    It had no discernible effect, and the o-ring sealed fine afterwards

  14. #14
    Join Date
    Jun 2014
    Location
    Chester
    Posts
    5,486
    WD40,Water displacement for fourty days and fourty nights?.

    I prefer three in one.
    Last edited by piggy589; 22-04-2017 at 12:09 PM.

  15. #15
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    fourty?

    What does WD-40® stand for?
    WD-40® literally stands for Water Displacement, 40th formula. That's the name straight out of the lab book used by the chemist who developed the product back in 1953. The chemist, Norm Larsen, was attempting to concoct a formula to prevent corrosion—a task which is done by displacing water. Norm's persistence paid off when he perfected the formula on his 40th try.
    https://wd40.com/faqs

    I have used wd40 on shuttle valves in offshore compressors to free off the shuttle valves .never had it wreck the seals .it just got blown out by the air. silicone grease or red rubber grease ( bit too thick) was used when rebuilding them. out on the job and no time to strip and clean it was wd40 or airtool oil that was used to free it off.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •