Silencer difference

[crowbar]

I have three Swift silencers two have a covexed end with a 7mm hex hole and a black satin finish
and measure 31mm dia ,200mm long .

The third one has a flat end with a 7mm round hole and a matt black finish
and measure 31mm dia ,170mm long .

HTH. Crowbar

[angrybear]

I have three Swift silencers two have a covexed end with a 7mm hex hole and a black satin finish
and measure 31mm dia ,200mm long .

The third one has a flat end with a 7mm round hole and a matt black finish
and measure 31mm dia ,170mm long .

HTH. Crowbar

Weihrauch is 195mm x 30mm.

[Trumpetier]

So it seems visually, (model dependent) without measuring, they look the same.

[angrybear]

So it seems visually, (model dependent) without measuring, they look the same.

There's a vid on youtube about fake swift mods & comparing the genuine one to my HW the taper on the Swift looks a lot longer at a gentler angle than my HW,
also on my HW both end caps have a glossier finish than the tube itself, where on the swift they appear to be the same finish.