Quote Originally Posted by bengarzy View Post
You obviously are NOT an expert as you would realise a REGULATOR conversion would NOT affect the zero, just consistency and shot count.
Also you have previously stated you found (eventualy) the rifle had had a"knock" which had caused the problem,hardly anything to do with me I think even you will agree.
Yes I do stock Light-Stream scopes but your test would have drawn the exact same comments from me regardless of what name was on it, it was a thoughtless and ill concieved piece you wrote so lets leave it at that.

Ben
The problem on TARGETZERO'S gun was caused by incorrect barrel to breech alignment, which may have been caused while being reassembled after the non standard metal finish had been applied.

To give you an idea of how "out of true" the barrel alignment was, the muzzle end of barrel touched the fill end of the air tube when the figure 8 bracket was removed.

The downwards tension on the barrel was so great, it caused the figure 8 bracket O ring to compress on the lower edge - leaving daylight to be visible on the upper edge.

Mechanical problems aside, it's a disgrace that someone like you should stoop so low as to have a pop at someone for grammer & punctuation - his opinions are as valid as the next unhappy customers.