Tx 200 safety

[robs5230]

Guide / tophat length as mentioned.
Trigger possibly gunked up or badly adjusted as mentioned.

Possibly the flange of the spring guide too thick.

[svendogg]

Guide / tophat length as mentioned.
Trigger possibly gunked up or badly adjusted as mentioned.

Possibly the flange of the spring guide too thick.

Trigger is clean and lightly oiled, I had the whole lot apart and cleaned, lubed and reassembled

[peddy]

I was getting intermittent safety problems until I removed a preload washer , now all is good. Coil bound is most probable cause or worn cocking shoe.