Results 1 to 15 of 15

Thread: Air Arms SE90 sidelever.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,469
    old combat / firepower were completely non adjustable triggers, and if mine is anything to go by, not even two sage. So it souds like the SE90 /EX88 should have better triggers

    to be fair it's the only thing I don't like about my hipower (in terms of technical design) - but it's usable.
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  2. #2
    tinbum's Avatar
    tinbum is online now Killer Vampire Lesbians on scooters
    Join Date
    Aug 2007
    Location
    Daarn Saaarf!
    Posts
    19,531
    It'll certainly be a world away from those dull German guns that bore you so much Pete.
    Have you registered with a good NHS dentist! Just asking like........
    My ignore list: ​<Hidden information>

  3. #3
    look no hands's Avatar
    look no hands is offline Even better looking than a HW35
    Join Date
    Apr 2003
    Location
    Coventry, even closer to Tony L.
    Posts
    12,147
    Quote Originally Posted by tinbum View Post
    It'll certainly be a world away from those dull German guns that bore you so much Pete.
    Have you registered with a good NHS dentist! Just asking like........
    I must admit my Combat is rather twangy but I've found the best way to fire it, is from the hip, thus no need for said dentist

    I'm sure you've managed to tame one?

    Pete
    Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in

  4. #4
    look no hands's Avatar
    look no hands is offline Even better looking than a HW35
    Join Date
    Apr 2003
    Location
    Coventry, even closer to Tony L.
    Posts
    12,147
    I do remember taking apart an early Jackel I had a few years ago and remember the pin and spring in the tube, I also remember the trigger mechanism was a nightmare getting back together but I think there's a lot of info on them on the net nowadays (unlike the owners manual I had that had an exploded view and that was it).

    Pete
    Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in

  5. #5
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,469
    Quote Originally Posted by look no hands View Post
    I must admit my Combat is rather twangy but I've found the best way to fire it, is from the hip, thus no need for said dentist

    I'm sure you've managed to tame one?

    Pete
    Tuned mine up and it responded really well. Just basic stuff - new (small dia) spring that is a tight fit on the inbuilt guide, then a thickish piston sleave to take up the remaining slack, and a good dollop of grease. my .22 runs about 11 FP and is quite calm to shoot. No twang at all.
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  6. #6
    Join Date
    Nov 2012
    Location
    Norwich
    Posts
    1,049
    I have a Hi-Power and a SE90 with a LH walnut stock, both 22. The 2 rifles are worlds apart. The SE90 is lovely.
    The SE90 I believe is un-touched, but shoots with minimal re-coil, and is plenty accurate. The comb is quite high, and I struggle sightly with the scope on medium mounts.

    Im getting a right sweet spot for side levers, they just work so well for me as a right handed person, who shoots left handed due to eyesight. Got a Webley tracker too ;-)

    Would do anything for a SE90 carbine....
    Thanks - Geoff.

  7. #7
    look no hands's Avatar
    look no hands is offline Even better looking than a HW35
    Join Date
    Apr 2003
    Location
    Coventry, even closer to Tony L.
    Posts
    12,147
    Quote Originally Posted by mrgeoff View Post
    I have a Hi-Power and a SE90 with a LH walnut stock, both 22. The 2 rifles are worlds apart. The SE90 is lovely.
    The SE90 I believe is un-touched, but shoots with minimal re-coil, and is plenty accurate. The comb is quite high, and I struggle sightly with the scope on medium mounts.
    That's the sort of info I wanted to hear, I may have to go and have a look at it soon.

    Pete
    Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in

  8. #8
    Join Date
    Nov 2012
    Location
    Norwich
    Posts
    1,049
    Oh, forgot to say, the trigger on my SE90 is not what im used to, the curve, or where its positioned pushes my finger upwards, so its touching the stock. Not sure if it can be adjusted rearwards, so the curve becomes more vertical? No issue with the trigger pull or weight, just the odd ergo of my trigger.
    Thanks - Geoff.

  9. #9
    Join Date
    Sep 2010
    Location
    Bruton
    Posts
    6,595
    Quote Originally Posted by Jon Budd View Post
    old combat / firepower were completely non adjustable triggers, and if mine is anything to go by, not even two sage. So it souds like the SE90 /EX88 should have better triggers

    to be fair it's the only thing I don't like about my hipower (in terms of technical design) - but it's usable.
    Are you sure there isn't a Webley Vulcan/Tracker style adjuster buried somewhere in there? The rather fuzzy Chambers parts diagram shows a lot of pointy bolty things at or around the end block.

    I never thought of trying to adjust the trigger on my Jackal Parabellum, because (a) it's not a bad trigger for a 70s novelty gun (no worse than contemporary Webleys or BSAs), and (b) it's a 70s novelty gun, not a tuned HW.

    I ask this because John Walter's book (1984 edition) refers (under the listing for the Supra, formerly the Jackal Woodstock) to a "trigger, adjustable down to about 2lbs". And I think the later EX88/Camargues etc from the mid-late 80s had a better and adjustable trigger.

  10. #10
    Join Date
    Jan 2007
    Location
    Plant City FL, 22 miles east of Tampa
    Posts
    1,453
    My early wooden stocked sidelevers have just a spring in the pin with the hole. Later guns had a screw to adjust weight of pull for sure. If you fancy taking the trigger mechanism apart, you better have a spare gun to look at when it comes time to reassemble. Things just fall out and you know not from where. My guns are very plain and the one in.22 has Jackal on top and the other, with a longer barrel in .177 has Air Arms on top. The trigger pull on both is light, but just a long pull back to the point it fires.

  11. #11
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    my Hi-power had an adjustable trigger. was in the pin going through the top as capitalBee has said also.

  12. #12
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,469
    Quote Originally Posted by bighit View Post
    my Hi-power had an adjustable trigger. was in the pin going through the top as capitalBee has said also.
    Sorry, I should have been more clear... yes, the trigger spring pressure (going through that big pin) could be adjusted, but there is no facility to adjust the bit that matters, i.e. let off point / 2nd stage, etc.

    Unless they are silly (this one is sensible), trigger pressure really isn't an issue for me - I just like to know when it's going to release
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •