Hi all,
Has anybody used gt85 ptfe spray on the metal to metal parts?
Cheers J
Hi all,
Has anybody used gt85 ptfe spray on the metal to metal parts?
Cheers J
I use a lot of GT85 - on the various motor/pushbikes/garden tools. Prefer it to WD40, in fact. Fine for gears/chains, show no signs of rust/seizing, kept outside all year round. The garden tools get a heavy coat over winter. But have only ever used it to soak a seized piston on my guns. Think it's too thin/not durable for gun use.
ATB
Bru
Webley Mk3 x2, Falcon & Junior rifles, HW35x2, AirSporter x2, Gold Star, Meteors x2, Diana 25. SMK B19, Webley Senior, Premier, Hurricane x 2, Tempest, Dan Wesson 8", Crosman 3576, Legends PO8.
Here's a great test of various lubes and their rust protection results.
https://www.bennetts.co.uk/bikesocia...nter-inhibitor
Some interesting tips and advice here, thanks very much !
What’s everyone using these days instead of the dri slide? I’ve seen “Phillips Molybdenum gun lubricant” for sale , has anybody had any luck with that or any other suggestions ?
Or should I just apply the moly grease as thi as possible to the inside of the chamber?
Any advice on TP sizes as I wanted to experiment with various lengths and calibre barrels
Chris
bigtoe, Harry, hydroclamp, jpsnorton, gayle89, mark410, Stu83, smallholder1, wellhouse0, readingcop, sir-slots-alot, danco1987, Stevenb, DarylDiane, simpleSimon, Ratinator, Milek, Josh, Maxtich, Woodsie99, Ozzie, master_shriller, niloc, Drake267, deejayuu, shootingstars