95/98/new 85 are 85mm stoke, not 86, all depends what seal is fitted obviously
If I get a chance i will boot the old machine up and get my notes off it, however only the stock stuff, not what i set.
95/98/new 85 are 85mm stoke, not 86, all depends what seal is fitted obviously
If I get a chance i will boot the old machine up and get my notes off it, however only the stock stuff, not what i set.
I can't blame you for that Tony --- I've just been watching that bloke on you tube who's nicking your ideas.
I've just watched him put grooves in an 80 piston that was running offset in the chuck --- and his Student sounds like a lorry engine with a knock.
All the best Mick
Some of my idea's even make BAR Mick, not me making them though, my opinion is any end user can make what they like but someone making financial gain from me....play the game and chat to me first
I'm willing to come to agreements, do NOT use my idea's and expect me to not take a dim view.
No more fresh idea's released without protecting them now, shame it has to be that way but it does...even Jim warned me it would happen a while back, should have listened to him me thinks.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- August 3/4, 2024.........BOING!!
Hi Tone
I didn't know if you'd realised but the video is of this bloke:-
http://www.airgunbbs.com/showthread....02#post6225002
All the best Mick
HW99S added. 90% sure the figures are correct....
Walther LGV - new model
Bore - 25mm
Stroke - 88mm
TP - 2.7x27mm
Piston Wt. - 258g
TX200HC, Prosport, LGV - ex PCP pussy!
Snooper601 Suspect a simple fault, or a simple engineer He who dies with the most toys wins!
QHAC Official lubricant development engineer.