Well done Steve.
Thank you, first class work.
Onwards and upwards.
Well done Steve.
Thank you, first class work.
Onwards and upwards.
Less is more
"The Springers" section is missing
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Excellent read ... thank you.
Now I somehow doubt if this is relevant and I may have mentioned it before but I am interested in your comment about a 100 series carbine. Some years ago I bought what was described as an Air Arms Chameleon .177 rifle at auction. It was covered in camo tape, action, stock, the lot so a thorough examination was not possible. On getting it home the tape was stripped off to reveal an obvious 100 series action type; a chrono test showed it to be way ott. A strip showed a Cortina suspension type hammer spring and a sort of home made valve head in that the old head had clearly been loose and araldited back on. The action had been 'carbined' by the simple method of cutting the end of the cylinder off, mostly the removable end cap area and welding the air filler valve threaded part back on. The filler valve was thus still removeable but as there was no end plug there was no internal seal. The trigger unit was the match trigger unit. I corrected the power issue but after very few shots, the valve head broke away ... a new replacement was not available but I did try making one. This had limited success as the rifle would only hold air for maybe a month. The cylinder seals were U rings, not standard O rings. I found a supply of these from a local firm.
Interestingly, the user manual (I used to have an SM100) gave instructions on how to adjust the power ... before the AT scene arrived on the block.
I eventually got bored of experimenting with trying to make a new valve head (and failing) so sold the rifle as a project.
Cheers, Phil
Excellent production Steve, I wish you well with the venture !
Are you a member down at "Idleback" ?
Atb,
John.
“An airgun or two”………
Well done Steve
I enjoyed looking through the site and quite a bit of history I hadn’t realised .
Ill have to take some pics of mine and send too Ypo .
Paul
Cheers Shoto.
It is in progress mate. The research is done and the pages have been created for the TX's/Pro Elite & Pro Sport. I hope to have it sorted some time this month.The side-levers will follow later.
Airmasters produced a "Chameleon" which I believe was a custom HW77. I'm not aware of a Chameleon version of the 100 series rifles but I may be wrong.
What you describe does not sound like the work of Air Arms or Airmasters so maybe someone was passing off a garage customed rifle.
As you say, power adjustment was no secret back then - even the mags would print instructions. I can't remember which rifle it is for but I have an Air Arms manual which says that the police do not look kindly if a gun is more than 1ftlb over the 12ftlb limit!
Thanks John and yes, i am a member of Idleback - i was down there earlier this evening.
I'm please you enjoyed it Paul - there's loads more to come.
Pictures would be great.
See you at Idleback sometime, I'm the bloke who just brings Springers !
Looking at your Username, we've probably got something else in common, Blue & White stripes ?
“An airgun or two”………
Good work Steve.
I bought an SM last year.
Thanks to you I now know all about it.
Hi Steve
Good informative site , well done 👍
Regards
James
Very nice work Steve.
I note that the "jackals lair" website appears, for me, to be down. I forget who created that (Jackel? paddy E?), but maybe you could re-use (with permission) that site's content on the springers. It was a good and authoritative resource.
Geez.