1.458" is shorter than the case. .223 case length should be approx 45mm. Your measurement comes out at less than 40mm. Something very wrong there.
Well lets put it this way....if somehow that length is the result of FL resizing, case head separation wont be far behind I am not sure it is even possible to do that.
Well lets put it this way....if somehow that length is the result of FL resizing, case head separation wont be far behind I am not sure it is even possible to do that.
Havnt sized anything bud just once fired brass drilled and tapped , but as I said stopped mucking about with 5 different cases and stuck with one measured about 6 times and average of 1.877 " to Ogive using a comparitor and COAL is 2.240 "