Results 1 to 15 of 16

Thread: HW95 barrel alignment problem

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2013
    Location
    Ashtead
    Posts
    95
    Quote Originally Posted by barghmatt View Post
    I told myself at the time not to take it to bits ��♂️


    Would you happen to know the side that both shims should go on if the barre is leaning left?

    All the best,

    Matt
    First thought is to say putting it on the left will push the barrel to the right but then we are talking about normally parallel faces and a shim would only displace a parallel barrel by its thickness. So, second thought is that placing the shim on the right hand side will increase the gap between faces on that side by enough for the left hand side of the clamping faces to push the barrel over to the right.
    Of course I am probably completely wrong so given it is an easy matter to remove and replace them just have a go and try it and if it doesn't work change them over.
    Sorry if this isn't of much help. Oh, and none of my 95's , and I have three of them, has more than one shim on either side
    Jim

  2. #2
    Join Date
    Jan 2008
    Location
    stratford upon avon
    Posts
    347
    Quote Originally Posted by Dagwood View Post
    First thought is to say putting it on the left will push the barrel to the right but then we are talking about normally parallel faces and a shim would only displace a parallel barrel by its thickness. So, second thought is that placing the shim on the right hand side will increase the gap between faces on that side by enough for the left hand side of the clamping faces to push the barrel over to the right.
    Of course I am probably completely wrong so given it is an easy matter to remove and replace them just have a go and try it and if it doesn't work change them over.
    Sorry if this isn't of much help. Oh, and none of my 95's , and I have three of them, has more than one shim on either side
    Jim


    Many thanks Jim,

    That very kind.

    I’m going to try this evening.

    Wish me luck 😁

  3. #3
    Join Date
    Jan 2008
    Location
    stratford upon avon
    Posts
    347

    Unhappy hw95

    Thanks all for your input,

    I've taken the gun apart & the barrel is bent

    Not only that, I've managed to damage the full length slip over barrel mod..

    Any idea where i could get a new .177 breech & barrel?

    I assume they are one part?.

    Many thanks again,

    Matt

  4. #4
    Join Date
    Nov 2014
    Location
    Batley
    Posts
    1,557
    That's bad news is that, you can get new barrels delivered to your door from sportwaffen Schneider in Germany bud.

  5. #5
    Join Date
    Jan 2008
    Location
    stratford upon avon
    Posts
    347

    Hw95

    Quote Originally Posted by mattyw1987 View Post
    That's bad news is that, you can get new barrels delivered to your door from sportwaffen Schneider in Germany bud.
    Thank you..

    Ill have a route around..

    All the best,

    Matt

  6. #6
    Join Date
    Jan 2008
    Location
    stratford upon avon
    Posts
    347

    HW95 with 98 barrel?

    Sorry to trouble you again fellas..

    Am I ok to assume a 98 shrouded barrel will fit to my 95 action?

    all the best,

    Matt

  7. #7
    Join Date
    Sep 2017
    Location
    Hampton
    Posts
    290
    Should do, they are basically the same gun. Rog

  8. #8
    Join Date
    Mar 2008
    Location
    Rochdale
    Posts
    2,101
    Quote Originally Posted by mattyw1987 View Post
    That's bad news is that, you can get new barrels delivered to your door from sportwaffen Schneider in Germany bud.
    I think that they are about 80 Euros plus post.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •