Quote Originally Posted by T 20 View Post
You may need a longer piston rod if you put an LGV piston in a T01 52, Jonathan, as the LGV rod is only 6mm longer than the 52 rod :-

image.jpg


LGV front of piston to latch face = 171mm

D52 front of piston to latch face = 165mm

i did some measuring of the tx piston and rod 150mm from latch face to the start of the thread so 164mm all in ,the compression cylinder has an internal length of 125mm and the piston measures 109mm from the rear bush mount to the back of the seal so am i right in thinking maybe a nose extension including piston seal of around 28-30mm