where can i get an slip on adapter to fit my 99 without damaging front sight grooves
where can i get an slip on adapter to fit my 99 without damaging front sight grooves
I don't think there is one other than the HW push on silencer/moderator.
You could get a set of needle files and cut grooves in the adaptor as has been stated on this thread or file the barrel.
As far as I know it's the only ways to do it. Or tap it on like dayglowfroggy and hope it lines up right with no clipping of the pellets inside the silencer/moderator.
Someone does one as i have one on another 99
As I mentioned on a previous thread a while back regarding the HW99s and moderators. I bought a MWSS200 off here and fitted it without touching the barrel grooves as it had corresponding grooves internally. Slides on and fixed with grub screw.
The one i tapped on came from the e bay for around a £5 pound it was not hard to do! I would be thought that the front sight Grove cut into the inside of the adapter some they are hard steel and it's not.
Ok thanks everyone
I have since bought a used one now and looking forward to trying it I believe it's a Matt one