mines here...ordered another 2
topped up a axsor no bother
BUT the metal feet/base plate isnt sturdy/strong enough,needs to be at least double the thickness.
Banned
mines here...ordered another 2
topped up a axsor no bother
BUT the metal feet/base plate isnt sturdy/strong enough,needs to be at least double the thickness.
Registered User
By drilling a small hole in the handle above the air intake, fitting an oring, dessicant could be put in the handle and thus air drawn in would be drier.
Plastic grips are on a bit tight.
Repariere nicht, was nicht kaputtist.
Registered User
Mine just arrived, 3 days since ordering.
Have built it up, (5 minuets) the fitting fits the rapid and it works, ok it's hard work but a good backup.
Have ordered 2 more, chuffed I am and buggered also.
snarepeg.
Registered User
the one i got has come no issues and works fine
i did think about buying 3 more and fitting them to a belt driven wheel powereed by a cement mixer engine i have sat doing nothing
Likes to eat trifle wearing scuba gear
Mine arrived today. Must a mishtake shurely
Looks fine quality wise!
Daystate Air Ranger FAC - Kral Bullpup & NP03 - CZ 452 .22lr - Lithgow 17hmr - Remington 783 .223 - Franchi 612vs 12G - Renato Gamba 12G O/U - Hatsan Escort 12G
Nostalgia isn't what it used to be.....
Muddled
Mines arrived. Ordered Weds arrived Friday. Well worth the money in spares alone (hose, fittings, gauge, test plug, etc.)
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
Registered User
I'm gonna order some more, Be great for xmas presents, Ok my old girl and sister won't know what it is but it's the thought that counts,
Registered User
Another 2 ordered while they still on offer,
The Chrono Slayer
It says the feet are 4mm thick, They're only 3mm and that's taking in to account the coating!!Originally Posted by the logun-ator
mines here...ordered another 2
topped up a axsor no bother
BUT the metal feet/base plate isnt sturdy/strong enough,needs to be at least double the thickness.
Still fine though for less than a skydiver!!
John
for my gunz guitarz and bonzai, see here
www.flickr.com/photos/8163995@N07/
Registered User
they seem to have sold out
this one is available at over 6x the price.. looks the same.
https://www.amazon.co.uk/Greensen-St...7CVB8MVG&psc=1
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Even better looking than a HW35
Mine arrived yesterday, the gauge and foot looks bigger on the one you've shown Jon.they seem to have sold out
this one is available at over 6x the price.. looks the same.
https://www.amazon.co.uk/Greensen-St...7CVB8MVG&psc=1
Mine seems pretty well built.
Pete
Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in
Registered User
Are some of different, My one had the quick connector / daystate type plug on the end of the whip, My other ones are due to be delivered Tuesday,
Elvis Floppyfeet
ordered 2 but without prime.....will try and fill a brocock tac up and see how it goes lol
email...... stephenbarrow@ntlworld.com
Even better looking than a HW35
I've got nothing to fill apart from my Theo rammer and I'm not emptying that just to test it.
I think with the case of the pumps having different bits fitted may be due to the old "you get what you pay for", if you pay a little bit more, you get a bigger foot (that folds up as well) and gauge, unless it's just a generic photo being used.
Pete
Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in
Even better looking than a HW35
Makes me laugh, it says the Greensen pump is out of stock but the identical Wakects pump is available at the same price?they seem to have sold out
this one is available at over 6x the price.. looks the same.
https://www.amazon.co.uk/Greensen-St...7CVB8MVG&psc=1
https://www.amazon.co.uk/High-Pressu...8HN98KKK&psc=1
Pete
Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in
Posting Permissions
Reply With Quote
