Quote Originally Posted by mickc View Post
I stripped my .20 magazine to clean/service it,anyway when I re assembled it I set the tension so it wasnt as strong as it had been before.I suppose I only done it for piece of mind after reading a few posts on different forums regarding Rapids being more accurate when single fed.I also have the single shot loader but these are far to fiddly and awkward (I even managed to get a pellet which fell back down into the bolt into the action.I had to remove the trigger cartridge to get it out).I mostly use the magazine but if I have to single load now I just place the pellet straight in the barrel.

ps there is a sticky in the Technical section on the R7OC site showing how
to strip and service the magazines.

I took my magazine apart tonight and reduced the spring tension one full turn (there's basically no preload on the spring at all now), guess what.. it's worked! The pellets don't get crushed now and accuracy is spot on .
Thanks.
Derek.