17 Hornet brass

[Ka-Boom!]

Guesty bought a forming die, possibly direct from lee, makes short work of turning proper hornet brass into its baby brother

Nah, I use a Redding F/L bushing die with no bushing which takes the neck to about 0.2". I then put the bushing back in and size completely. It needs trimming annealing before fireforming.

[223AI]

Nah, I use a Redding F/L bushing die with no bushing which takes the neck to about 0.2". I then put the bushing back in and size completely. It needs trimming annealing before fireforming.

Ah, we did speak about you ordering a lee die I'm sure!

[Ka-Boom!]

Ah, we did speak about you ordering a lee die I'm sure!

Nah, I have been petitioning Lee to make the neck collet die in 17 Hornady Hornet but no luck so far. I can't be bothered with the faff a custom one though.

[SPARKIE]

try bullberry in the states or the woodchuck den they usually have a good supply of forming dies that's where I got mine from.