Quote Originally Posted by joffy View Post
i did some measuring of the tx piston and rod 150mm from latch face to the start of the thread so 164mm all in ,the compression cylinder has an internal length of 125mm and the piston measures 109mm from the rear bush mount to the back of the seal so am i right in thinking maybe a nose extension including piston seal of around 28-30mm
You could either fit a nose extension so that the rear bearing flange doesn't hit the rear of the cylinder, or alternatively reduce the cylinder length and fit a longer latch rod to the piston.

What is the standard stroke of your D52 ? --- I have a feeling that they came with two different strokes.

I'd work out what stroke you want and then work the piston and latch rod accordingly.




All the best Mick