Well hidden on the website but now up to £20! But at a tenner it was way too cheap
Well hidden on the website but now up to £20! But at a tenner it was way too cheap
WANTED: Next weeks winning lottery numbers :-)
Hello to All,
Fitted the 'Sweet Sixteen' trigger on Friday, and have put a tin of pellets through the TX since.
The trigger is, for me, superb
Due to it's greater width, the apparent trigger weight feels reduced, and my finger fits the blade to a tee
I was totally surprised that the trigger, as is, was perfectly adjusted for a very crisp finish - I had no need to apply even a fine tweak to the screws - it was absolutely spot on.
Definitely a very wise spend of £15.
I would recommend this trigger to all TX200 users.
have fun & a good Sunday
Best regards
Russ
Oh dear, now £20.00 and then £5.50 postage. Looks like the usual British problem of success.
A.G
To be fair they are worth £30 all day long. I paid £30 for a secondhand rowan TX trigger blade, and they are over £40 new -this (IMHO) is better.
I think it's more a question on a low initial launch price to drum up interest, and then setting the price more realistically.. which is fair enough !
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
It does fit in a Rekord - but only with some fettling.
Had to turn up a reducing sleeve to improve the fit of the Rekord 2mm pin - but then again, the standard Rekord trigger flops about on the pin like a wet haddock! also had to fit 1mm shims either side to stop side-side play, then get out the files to re-profile and relieve the brass to prevent it locking up against the trigger spring screw bracket. Also, a new shorter trigger spring adjuster is required as the rib on the back of the blade fouls the standard screw.
All works now on the bench. Will go back into the '77 action I'm playing with tomorrow - if I can find the safety spring!
Will post up some comparison photos of the trigger blade in the Rekord tomorrow.
.
Jerry
Just messaged the vendor and he's going to do a Rekord specific version soon
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.