HW100 bullpup

[j rayner]

Started to make a bullpup stock this afternoon from the same ash branch i used for my crosman, bit of a pain cutting planks from a 12" dia log with a sabre saw, did it though, my tools are a bit rough and ready but it gets the job done eventually
http://i1128.photobucket.com/albums/...lpup%20009.jpg

Its still got a way to go but its taking shape, oh and there's also a pic of the other side of the ratty i hope.

Regards, Mark.

How's it going mark. ?

[buttloaves]

How's it going mark. ?

Hi, ok thanks for asking, the HW stock has moved on a little bit but work has slowed things down a bit, i include a couple of pics, i need to fit the action next hopefully i will get to that today.

Regards, Mark.

[j rayner]

Hi, ok thanks for asking, the HW stock has moved on a little bit but work has slowed things down a bit, i include a couple of pics, i need to fit the action next hopefully i will get to that today.

Regards, Mark.

that looks tottaly unique..the klingons will be after that for sure.well done fella.i made a start on my stock yesterday,[laminate]i havent got a gun yet so not made a move on marking it out yet as im not sure about where to put the pistol grip etc.am still looking for a 177 or 20 hw100.thanks for the update.tops.atb jez

[buttloaves]

that looks tottaly unique..the klingons will be after that for sure.well done fella.i made a start on my stock yesterday,[laminate]i havent got a gun yet so not made a move on marking it out yet as im not sure about where to put the pistol grip etc.am still looking for a 177 or 20 hw100.thanks for the update.tops.atb jez

Jez the pistol grip should be relative to the position of the butt pad, ideally if you push the pad into the crook of your elbow your hand should naturally fall onto the pistol grip, works for me, now you need to decide where you want the action to start,mine is set well back at 25mm from the end of the wood,pad not fitted yet, which will put my trigger between the scope rail mounting ring and cylinder mounting ring between which i can create the trigger mounting i hope.
Regards, Mark.

[j rayner]

Jez the pistol grip should be relative to the position of the butt pad, ideally if you push the pad into the crook of your elbow your hand should naturally fall onto the pistol grip, works for me, now you need to decide where you want the action to start,mine is set well back at 25mm from the end of the wood,pad not fitted yet, which will put my trigger between the scope rail mounting ring and cylinder mounting ring between which i can create the trigger mounting i hope.
Regards, Mark.

thanks for the advice mark.i think i have oversized my laminate blank at 810mmx250mmx53mm.as i dont have a gun to work with yet im thinking to leave it aloan carving wise to see what can be cut away and what to leave on.am busting to get a gun but a bit short of cash at the mo.selling stuff to gain funds.usual stuff eh.atb jez

[buttloaves]

thanks for the advice mark.i think i have oversized my laminate blank at 810mmx250mmx53mm.as i dont have a gun to work with yet im thinking to leave it aloan carving wise to see what can be cut away and what to leave on.am busting to get a gun but a bit short of cash at the mo.selling stuff to gain funds.usual stuff eh.atb jez

In the same boat mate, at least the stock will be free