Last edited by MartynB; 18-03-2018 at 11:48 AM.
Custom BSA S10 .22 PAX Phoenix Mk 2 .22 Custom Titan Manitou .22 (JB BP) HW77 .22 FWB Sport Mk1 .22 Sharp Ace .22 Crossman 600 .22 Berretta 92 .20 Desert Eagle .177
A specific made up barrel for an air rifle yes, but not blanks. Have had blanks before from chambers that were delivered straight to my door and no RFD needed.
You can get Weihrauch blanks from Silco direct to your door for around half the price of LW blanks.
http://silco.co.uk/categories/WEIHRAUCH-BARREL-BLANKS/
Thanks for the replies gents and sorry for my late reply. I have done some more research. The .25 barrel turned out to be a LW blank; outer diameter is 16mm, and BSA barrels are 15.4. A machinist will modify it to fit my BSA pcps, using a .25 Ultra barrel as an example. The .20 barrel is a Rapid barrel. I will sell it on, as I think it would be a shame to modify it. As you point out. And making a .20 probe and probe guide for my BSA's is possible, but I've spent enough this month on airguns and related items haha. So that's it
Have fun with your .25" project
WANTED: Next weeks winning lottery numbers :-)
Thank you
It is going well so far.
I am using a 15.2" .25 Scorpion barrel on the Ultra. With a 250mm cylinder. 10 more or less consistent shots at 20 fpe. Excellent accuracy, I tested up to 60 yards.
With the 24" barrel, I assume the power and shot count will be higher. There are 325mm and 425mm cylinders on their way. And a huma reg. That goes up to 155 bars, we'll see.
But I do like .25.
Best regards, Louis