Results 1 to 15 of 32

Thread: is there anyone else that likes the Relum Telly 200 ?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2019
    Location
    Manchester
    Posts
    1,732
    Quote Originally Posted by johnbaz View Post
    Hi Pete

    I looked at the parts sites, Also googled images and none of them are the same as the base on this rifle!, Strange!, The just seem to be a very shallow dovetail, On this one there seems to be base block!

    EDIT- Here's a pic that I borrowed from t'interweb, It shows the sights that are being sold by Protek, Knibbs and Chambers, It's nowhere near as deep as the base that's on mine, I wonder if on mine someone tried fitting a different sight




    John
    John, that sight in the picture looks like a Pre war Haenal or Diana sight. It is not the same as the Relum sights sold by Protek. It is longer and the Relum sight has a slotted screw rather than a thumbwheel for adjustment.

  2. #2
    Join Date
    Jul 2006
    Location
    sheffield
    Posts
    6,700
    Quote Originally Posted by WebleyWombler View Post
    John, that sight in the picture looks like a Pre war Haenal or Diana sight. It is not the same as the Relum sights sold by Protek. It is longer and the Relum sight has a slotted screw rather than a thumbwheel for adjustment.
    It's strange as everything points to it being this very low sight, Chambers diagram shows it as this one, Knibbs shows this one too, I can't actually find one on Protek supplies that's specifically under the Relum Telly/ LP25 but then, They have a Tornado page yet there's parts for the Tornado in the Telly page!!


    I think I'll make a rear leafsight to screw down to the block that's already there, This would probably be the easiest!!


    John
    for my gunz guitarz and bonzai, see here
    www.flickr.com/photos/8163995@N07/

  3. #3
    Join Date
    Sep 2002
    Location
    Bexhill-on-sea East Sussex
    Posts
    1,925
    Quote Originally Posted by johnbaz View Post
    It's strange as everything points to it being this very low sight, Chambers diagram shows it as this one, Knibbs shows this one too, I can't actually find one on Protek supplies that's specifically under the Relum Telly/ LP25 but then, They have a Tornado page yet there's parts for the Tornado in the Telly page!!


    I think I'll make a rear leafsight to screw down to the block that's already there, This would probably be the easiest!!


    John
    The protek sights are the correct ones at £6 each, under relum spares number R30 they are on there with a picture of them aswell.

  4. #4
    Join Date
    Aug 2019
    Location
    Manchester
    Posts
    1,732
    Quote Originally Posted by jjjjjj View Post
    The protek sights are the correct ones at £6 each, under relum spares number R30 they are on there with a picture of them aswell.
    I agree. Relums do have a very shallow dovetail cut into the block and the Protek sights are correct for the majority of Relums range.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •