Its a metal weight that adds mass to the piston . If you have left it in then it adds more preload to the spring which may cause it to shoot harshly .
If left in then you have that then a top hat which is a fair bit of preload . but i'm guessing it would not cock as the spring guide would hit the top hat before the rifle cocked .
Very good point, Mr Bighit.
Also, Steve, I wouldn't have thought that the tissue paper test for the breech seal when considering a sliding compression cylinder gun would be conclusive. As they're cheap to buy, maybe worth a new breech seal to test and then isolate that possible cause.
97s, correctly set-up, whether a 25mm or 26mm should be an absolute joy to shoot and a model of sweet-shooting springer loveliness. I'm sure you'll get there.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- August 3/4, 2024.........BOING!!
The trouble is one persons bag of nails is anothers pleasant shooter.
If you want you can post it to me and I'll check it all over. All it'll cost you is the postage
My ignore list: <Hidden information>
Thank you very much for that offer mr tinbum but I have booked the 97 to be fettled by Paul short and it's due to be sent off this Friday.i was very pleased with the job your service kit did for my rifle and kn no terms am I saying the rifledoes not shoot very well is because of the kit.the problem must lie elsewhere.thanks again.
steve did you buy it from sunderland scuba centre trimdon street ?.i bought my 97k new from there its very good as it goes.theres a guy from seaham called jeff,hes very good gunsmith busy doing my hw98 try him.by the way just outta interest for ya theres a 60 yard range opening philidephia soon.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- August 3/4, 2024.........BOING!!