buying another barrel

[Treebone]

So why are barrels rfd to rfd only (you cannot have one posted to your house) you have to go to your local rfd to pick it up
Thought revolver barrels have a forcing cone

If you are talking about rifle barrels that have been chambered then you are correct, however rifle barrel blanks be they contoured or not and even threaded are freely available and can be posted as long as they do not have a chamber, i have bought several the last one in April this year.

TB.

[enfield2band]

If a barrel is a pressure bearing part as a component of the firearm it is fitted to how does it cease to be a none FAC item when you take it off?

What you are saying is that when I handed in my .357" Smith & Wesson when they were banned I could have taken the barrel off and kept it?
Or, when you scrap a gun you can saw off the barrel in front of the chamber and keep it?

I'm interested in your comments.

[airgunnut]

If you are talking about rifle barrels that have been chambered then you are correct, however rifle barrel blanks be they contoured or not and even threaded are freely available and can be posted as long as they do not have a chamber, i have bought several the last one in April this year.

TB.

let me get this straight, you can buy a barrel and have it sent to your house but not a silencer/moderater.

[DesG]

What I said earlier was

"The UK firearms laws are so straitforward and simple to understand that that might well be the case, or not!!! I bet if you asked a dozen different FEOs you would get as many different answers. "

There was a stall at last year's gunshow selling a whole selection of old mods as paperweights. So yes you probably could have a mod sent through the post provided you had no intention of using it on a firearms. I never said any of it makes sense!!

[Treebone]

let me get this straight, you can buy a barrel and have it sent to your house but not a silencer/moderater.

You can buy a non chambered barrel blank and have it sent to your house, until it is chambered it is not regarded as a FAC regulated part because it is not capable of discharging a projectile, it is in fact only a rifled tube.
Moderators are a grey area because they are regarded as an accessory to a firearm, they cant really be classed as a firearm in their own right, the ridiculousness of the situation is that you can buy a SAC mod for your air rifle but want to purchase it for your 22LR it has to be entered against an authority to posses on your FAC so basically they are saying it depends on what you want to put the mod on that dictates whether it is a Section 1 firearm or not

TB.

[xbow]

I would have thought proofing was for a "closed" component like a canon or a chambered rifle barrel. How can you proof a revolver barrel that's just a tube open at both ends? Just asking.

[DesG]

The whole gun would be tested as a unit after barrel replacement.

[robinghewitt]

I think you ask your firearms liaison officer because nobody else's opinion counts for diddly

[DesG]

I think you ask your firearms liaison officer because nobody else's opinion counts for diddly

So true!

[airgunnut]

I think you ask your firearms liaison officer because nobody else's opinion counts for diddly

This is my usual reply, I keep thinking why do people keep asking for firearms advice on a forum when it would be simpler, quicker and more accurate to just phone there local firearms leason officer and ask some one who answers questions like this for a living

[RichardH]

I think you ask your firearms liaison officer because nobody else's opinion counts for diddly

I would remind you your FEO is normally a civilian employee.

His advice unless in writing on police headed paper I s worth as much in court as the next fella in a pub..