You are not even close. Most I've removed is 20+ but my pal's had one with 33!!
You are not even close. Most I've removed is 20+ but my pal's had one with 33!!
Have I stated that I am a smart airgunner?
No, acctually I admitted to be the most stupid of all..
I have ruined the gun, that much I understand but so much goes southway in my life so altogether Im not surprised..
Anyhow, I tried shooting it at home in my flat aprox 7.5m.. without any sights .. it loads and shoots seemingly ok but I have no doubts the precision will turn out to be ruined..
Time will tell...
Unless you have physically damaged part of the bore or crown it is unlikely you have ruined the rifle.
I would suggest though that before doing any further shooting that the rifle is stripped and inspected as something has caused the initial problem of a pellet sticking and a service may be required.
People who have been there focus on the fundamentals. People who sit at keyboards all day focus on the trivial and inane.
Ruined the gun = ruined the barrel..
I will post updates however.
And thank you ALL for helping me out with all your feedback
I had a Rohm 5 shot pistol with 5 stuck in the barrel.It's easier to do than you think on fast fire if you don't notice the gas pressure is down a bit.I just melted them out,you don't need a lot of heat to melt lead,didn't seem to do any harm after cleaning the barrel.
That was an interesting approach!
Of course I had to do a test by melting one pellet in a teaspoon using a lighter... :
After aprox 1min the pellet melted and I poured it out..but there where som leftovers stucked to the spoon.
How did you proceed cleaning the barrel afterward?
Now that you've got it shooting again? ,have you chronod it to see what foot lbs and velocity it's doing ?.
Might give you an insight as to why it blocked the barrel in the first place .
ATB, Gordon.
Professional Ferret Juggler
I am a lot surprised!
I also think the the lack of more hole/holes is due to my skills not problem with barrel.
I have to do more test, this time with scope. And of course also at further distances..
After I shot 10-12 pellets today I noticed that something was on its way up the barrel.. I thought dust of some kind but when I peeled it out I found its some kind of soft "rubber" (plastic debris?)
I took a look in the barrel to find out if there where more..but no. I also glared into reverse side..it seems something is broken inside that "hole"..
As has been stated in this thread.....sorry mate it looks like your piston head is failling and is disintegrating, it may seem ok at the moment, but I would get it checked serviced and you will be surprised before you get a nasty surprise