Which reg...

[MrGreengrass]

Definitely no drilling holes to fit my P15 Huma reg.

[Anothermiss]

Definitely no drilling holes to fit my P15 Huma reg.

And Huma are back in the race. Cheers Mr G.

[MrGreengrass]

And Huma are back in the race. Cheers Mr G.

I would never consider anything that involved drilling holes in a high pressure vessel hence the choice.

[Anothermiss]

I would never consider anything that involved drilling holes in a high pressure vessel hence the choice.

Think ill just bite bullet and do huma, although I've been stripping, changing and rebuilding with the std reg over the last 2 days.
I'm getting 11.2ftlb with 8.4gr FTT between 250 Bar and 100 bar. After that it tails off gently.
I think that's about right for me. Hammer spring isn't over loaded so it's smooth enough to shoot.
I considered opening ports a tiny amount etc but then decided I'd just enjoy shooting the thing.

[fzrandy]

I have 2 P15s .22 and .177 definitely no drilling required have got Lane regulator's in both it's an easy like for like swap changed mine as was getting reg creep on the 177 so guessed that the 22 wouldn't be far behind ... Can highly recommend the lane regulator and also he's very helpful if you need advise

[Anothermiss]

I have 2 P15s .22 and .177 definitely no drilling required have got Lane regulator's in both it's an easy like for like swap changed mine as was getting reg creep on the 177 so guessed that the 22 wouldn't be far behind ... Can highly recommend the lane regulator and also he's very helpful if you need advise

I did a bit of research on Mr Lane's regs and discovered he's taken a break due to ill health. I'd prefer to buy a UK product in honesty but I'm unsure when he will be back trading.
I hope he's OK. My regulator issue is a very small one when compared to the fellas health.

Speedy recovery, Rob.
Dan

[Oscar15]

cant go wrong with a huma. consistency is fabulous

[Harley_Steve]

Definitely no drilling holes to fit my P15 Huma reg.

I stand corrected.

[bunnysniper]

got a huma in mine no drilling and nice easy fit

[cjsid]

Lane reg no drilling straight swap over , works well

[Anothermiss]

Thanks fellas. I'm going to hold out to see if Rob Lane opens for trade again. If that doesn't happen over the next month or so I'll prob go huma.

[binxkeys]

I've a lane reg and it works well. Mines external but the drilling on the internal doesn't look like a big deal and is important for the performance.

[Simonsays]

The P15 has a reg so should have a breath hole already?

[Anothermiss]

The P15 has a reg so should have a breath hole already?

It does have a reg but no hole - the standard reg doesn't bleed off to atmosphere.