AA TX200 MK2 .177, MK3 Barrel, long stroked & shortened T/P
AA TX200 MK3 HC .177, 22mm internals, shortened T/P
http://www.anstonftc.co.uk/
Just a thought on these eye bell adjusters, if you were to unscrew them as far as possible so they came away from the main body completely, would you lose the vaccuum or rather purged air from within the main tube?
Well, all info seems positive enough for me so on the strength of that I have just placed an order for one.
Thanks again,
I have owned a couple recently and would rate them as good value for money. I would also suggest that many scopes in this particular price bracket do tend to lose zero if the parallax setting is altered along with the zoom. My own way around this was to find the optimum position for both and leave them. This is of course not that practical, so it might be worth those purchasing such scopes to try and confirm your zero settings if you keep moving the settings and making a note of any change to your point of impact. More expensive optics do not tend to suffer from this, which, in addition to the quality of the lenses, is why some shooters pay a lot of money for a quality scope.
Andy
Member, the Feinwerkbau Sport appreciation Society (over 50's chapter)
http://www.rivington-riflemen.eu/ Andy, from the North !