Kral air rifles

[phil384]

Following with interest i'm looking to pick up my first pcp and an NP-02 keeps reappearing at the top of my list

You can't go far wrong.

[seamonkey]

You can't go far wrong.

How is the length of pull, been going down the usual youtube rabbit holes and this seems to crop up often?

[phil384]

How is the length of pull, been going down the usual youtube rabbit holes and this seems to crop up often?

Yes it's long.

I bought a 3D printed replacement off the bay which did the trick.

[baldinio]

How is the length of pull, been going down the usual youtube rabbit holes and this seems to crop up often?

It's not really an issue but yes it's slightly longer than the average lop. I'm average build and don't struggle with it.

[rovercoupe]

I had a go at fixing a np02 as it was leaking in the fill probe area and had no success getting the end block off, went as far as I dared clamping the cylinder in a vice and even bent the bar that was lathe made to Fit the fill port trying to get it unscrewed. Gave it a bit of heat and it made no difference so they are well put together just hope they never have to come apart!

Saying that I do have a puncher breaker and it’s quite a nice bit of kit for the money.

[I. J.]

It's not really an issue but yes it's slightly longer than the average lop. I'm average build and don't struggle with it.

/\ /\ /\ /\ What he said.