Skan 32

[rsrjerry]

there are quite a few variants on the basic Skan principle.
I have a mk1 and had a mk2 as well as some of the later models.
I think you need a picture or two to help people identify the specific model and suggest what might fit.

A fill adapter is something that can be turned up by a machinist if not easily available.....a magazine might be trickier...

It will certainly be worth sorting out parts for as these are collectable and interesting niche pcp. breaking for parts would be almost criminal!!

Thanks for the quick reply I think by having a look it is the 32 mini but what mark not sure ?
I can’t see on this thread how to upload any photos I’m afraid ?

[eyebull]

I can’t see on this thread how to upload any photos I’m afraid ?

You have to host photos on an external site like flikr or imgur, and then link to it.

[eyebull]

BTW here is a link to the (rather basic) manual:

https://drive.google.com/file/d/18Ta...ew?usp=sharing


You can still get pellet probe o-rings on the bay. Don't think anyone is offficially supplying spares though.

[rsrjerry]

Hope this link works ?

https://postimg.cc/gallery/1Zxr3sm

[eyebull]

Yes that's a mini M32 (poss. R32), the mk before mine, so the manual will be relevant and it will use the same fill adaptor.

[WILBA]

Hope this link works ?

https://postimg.cc/gallery/1Zxr3sm

Hi jerry.that gun will cost you a good £350-£400 to sort out. Last time I priced getting a fill adapter made I was priced £120. The magazines go for £100-£150 second-hand. Looking at the pics you are also missing the magazine holder on the gun and that's going to cost a fortune to get made plus who is going to lend you a non existent part to be measured up it to be pattened.

[eyebull]

Turns out the Superten and Rapid fill adaptors are one and the same. For £15 from Best Fittings this is definitely worth a try. Mike Childs wasn't having bottles made from scratch, just like he wasn't making his own barrels, it was an off the shelf part.

If anyone has a superten or rapid and can measure the thread on the bottle, I can compare it to my Skan.

[Alakar]

I was once told that Colin g on here is the go to man for Skan rifles knowledge.