Quote Originally Posted by look no hands View Post
The piston seal was in the gun (obviously) so not sure how old it is, I did try fitting a new one but buggered up the dovetail part fixing lug because I didn't use the magic Theoben way of fitting it , I used a Titan no14 spring which I had to shorten by 3 coils as it was impossible trying to get it in the cylinder without doing myself an injury or risk having it torpedo around the shed, I used the usual .177 AA domed pellets, the spring guide is a snug fit, not tight that you have to really push it hard to get it on.

Like I said before I didn't really give it that much time as the circlip that holds the rear guide in looks a bit worn and I didn't want to risk breaking it as with most Theoben parts now they are either hard to get or bloody expensive, I could have tried some preload washers and that may have got the power up into the 10ftp area but like you say, I think the seal may need replacing but I don't really want to spend another £30 at the moment on another seal when my next project is waiting to be worked on (infact I've just bought some stuff for it today).

Pete
Not familiar with the titan 14 in terms of sizing but it looks like a diana 350 replacement.
Just seen in your signature a scirocco in .177. Was that the rifle you tried springing? Mine was .22