Interesting I applied my new Damping grease “Kilopoise“ that sealed my taps to the probe of my 108. It did eliminate any movement of a tissue put on the breech fired with 6 pumps. Did not seem to change my FPS output, but I assume my leakage was slight? “Kilopoise” is interesting stuff, not sure it’s appreciated in it Country of origin? Lol
Also not sure that this will be a lasting effect as more and more pellets are fired. But Kilopoise is the stickiest most bizarre compound I have ever encountered.
Last edited by 45flint; 29-11-2018 at 07:36 PM.
try lapping the probe to the barrel leade Louis
Recommended by Gaylord as well in his review; but I’m not really familiar with this process?
“A real fanatic might have used some automotive valve-grinding compound to hand-lap the front of the bolt into the rear of the barrel; but this wasn’t my rifle, so I left it at that.”
same process as lapping valves in engines just add a bit and turn repeatedly
Yes I am itching to reseal it. I need the T1/T5 tool though. Unfortunately it is not available from Baker Airguns, JG airguns or Rick Willnecker of Precision Pellet.
Luckily Ped is a fantastically friendly and very knowledgeable/skilled man who has offered to make one for me. That is really nice.
I'll keep you updated.
Cheers, Louis
Last edited by jirushi; 03-12-2018 at 06:18 AM.
no probs Louis
a lightweight one just needs a fettle on the edges a hole for a tommy bar and a handle if you want one
https://i.imgur.com/9FbJV3j.jpg
https://i.imgur.com/ndD0mtm.jpg
i'll try to get it in the post tomorrow for you