Activity Stream

That'd be nice, John, but any would do. The 30 is quite elegant so I think I'd be going for a 4x32 as opposed to something really stumpy.

Sounding good, Chris. Personally I wouldn't have thought that a slightly loose fit of the seal would cause an issue, but I'm not aware of HOW much...

In my experience the new HW seals are usually on the loose side if anything. As said best to replace with a genuine new HW seal. Regards Max

Along similar lines, my neighbour has a couple of dive bottles. He hasn't used them for years so I suspect they need testing. at the moment they are...

If you hammered it in ,the cutouts in the action will have shredded the seal .

Ok well after some investigation, the only test centre near mid Devon is Now Teign Diving in Teignmouth. Seems that when JRS shut they bought his...

I'd of replaced the seal before I re assembled. Possible that it's been worked on then some one has touched it with magic hands to improve it later.

Probably a .22 in the synth stock. Not sure of scope yet but something smallish and fixed mag I think.

I would try a new piston seal. They can go hard depending on what they have been in contact with.

As above and see the thread on the Mercury at the moment. Get any late Mercury with the axis bolt. If you find an older Merc. Just make sure it has...

If i have any issue's like that while its stripped down i would'nt be putting it back together with a hammer bro Resizing the seal when you hammer...

I didn’t know that, they are accurate guns generally but shooting an 80s FT course was difficult with them, there was a time limit and the furious...

Never had any issues with the standard HW piston seals. Maybe worth replacing the seal? Or you could try resizing the seal first?

Investment by Gamo was probably a good thing for BSA. BSA are still in business manufacturing in Britain. Webley got bought by British owners and...

Indeed.:oldwink: 1377s, too.:oldwink::)

Fitted the Rekord to the old-school '50 yesterday and scoped her up:- As it was nice and warm I could hear the CO2 guns itching to have a...

Crikey Pete what a PITA that must be. Don't give in to frustration & over do it & hopefully we'll see you in July. .

Fitted the Rekord yesterday. Prior to fitting I made sure it was clean. Gave it a light oiling and adjusted the sear engagement and weight. Lovely....

Er...I think it's actually 17 sleeps to go!:oldeek::oldconfused::rolleyes: Mmmm.....not sure what happened there!:rolleyes: