Activity Stream

Very much looking forward to seeing how different it feels, Mark; thank you.:) And the Panamax pairing does sound perfect to me.:)

Sounding most excellent, Chris.:oldwink: And hopefully you'll be able to gain access to those stock recesses and introduce some sound deadening...

Gents, my AM03 is all back together and I'll be bringing it along if anyone would like a play. I've only had a few brief sessions with it and...

Little update on this 220 Now it’s bedded in with over 1000 shots through it, It’s now settled and very consistent and running low 8’s with what’s...

I have one, if the fill pressure goes above 180 bar the power drops until enough shots have been taken for the hammer to overcome the valve pressure,...

Congratulations on your first attempt at mainspring surgery. Not too scary a proposition once you pluck up the courage, is it?:) Hope all...

Just five teensy, weensy little sleeps to go for the Saturday peeps.:oldwink::) And the Sun looks like he's making that splendid, el scorchio...

Spot on, Paul. Thank you.:) I got the time yesterday evening and stripped it again. The spring is, indeed, of the more stout breed. Measured in at...

Sorry to hear this, Les. My wife also suffers from it. Not nice. You both have my sympathy.

Yep, I'm a bit of a reluctant dinosaur when it comes to IT techy-type things, Paul. As far as I'm aware, NM only got .22s in this batch of AM03s....

Removed the spring yesterday evening. It is, indeed, of 3.7mm wire. Well, measured in at 3.67 on my very-near-calipers.

And very much looking forward to seeing your good self, your wonderful toys and the Boingerati Collective. The weather's looking to be fantastic,...

I'm using the Lyman stuff at the moment which came with the tumbler. At least 50% of the primer holes are blocked. The cat litter stuff will be here...

HW80 would have been better back then (and that’s basically what you’ll have), but if you can find one, I’d start the next search for a decent...

I dropped the pressure to 110ish bar and it shot around 9ftlbs and then charged it to 140ish bar and came out about 10ftlbs???

I asked the question about putting a gun stock in my other checked luggage... Yes, you can typically carry a bare wooden stock in your checked...

The stuff I use is walnut sand very fine and does not clog the primer hole , I have another bag that every time I have tried to tumble a couple of...

Thanks for the input... As per my other posts, by the end of the year I should have my personal Webley Vulcan Mk2 and HW80 back on my hands, that...

I’d suggest getting some old copies of Airgun World, especially from the 80s through to the 2000s, and have a good look through the articles and...

I replaced the volumetric on my first s10 carbine with a logun silencer/mod back in the 00s ....bought a newer logun carbon one for this carbine i...

Both guns will be at my Son's place in Az in the next week... He is VERY particular about things, so he will unbox and take better pics when they...

No worries and indeed no rush, just wanted to know when so I can work appointments around it, thats all so I apologise if it came off pushy. I've...