Activity Stream

Short answer: no.

Good point.

I’m willing to forego the magic number Tone if it means The July Bash is closer :cool:

But those rifle will not be firing over the very short distance we use probably 300 MTRS plus and at that distance the real wind is having effect.

The thing is the rifle is is clamped solid so apart from releasing the trigger I have no other involvement. Also it's amazing how much different...

Ive always thought of them as less accurate as the balance is too far back. You never see a bolt action centrefire rifle for long range shooting...

Mine is a Steyr ProX which is a bullpup. The difference between this and my HW100 is that the Steyr makes a noise in my earhole as the magazine is...

Join the Theoben Rapid forum, he's one of the site Admins & has his own contact section.

With a bullpup there is less barrel in front of your hands which means you have better control, I can't think of the correct term, but it's the...

i will be shortly just having time to get tem all out and photo them a lot have sold so far has been word of mouth to people i know or have dealt...

Yha he's still is and great guy he is too:oldwink:

Hi bud, I have a lee pot, I have'nt used it for a year so I'll check that it works on the weekend, if it does I'll send you some picture's and sort...

It's an interesting question but breech seal seam to last years with the barrel closed as it is, so I shall continue to store mine closed and I shall...

Soooo ... no better than an HW30S.

Well within the normal spec for a human hand. If you had a hand with a forefinger long enough to use a HW trigger properly, when you used a normal...

Bargain solution!

So. I am normal ?

Many 35s can be opened with a slight slap to the barrel, it's harder to open some HW80s ... The proper barrel latch is on the HW55, an adjustable...

Nah, the dragon uses a clever moving falcrum design, so the cocking effort towards the end is similar to that at the start. The downside of the...

No, you don't, you'd have to be a flippin gibbon to be able to reach the trigger and get a straight-back press with nearly all HWs. Some of the old...

Yeah, I have a bandsaw in the shed :)

Chers Tone, Interesting review note it was from back in 2017 :oldeek: A quick search in zee USA and there are x4 in stock :oldgrin: ...

I guess if you tried a Custom Stock and found it too long, they could shorten it for you. Likewise, butt pad spacers could increase it relatively...

is the rifle leather sealed or synthetic ? I'd be changing to synthetic as a first step, if your port allows. Also, when you order your kit, check...

I find too long a LOP stops me getting my trigger hand palm tucked in behind the pistol grip, and it is forced into a less vertical (rotationally -...

Thanks, that makes sense... Ironic isn't it ? The "marketing" of the 35 around the security of a manual barrel latch, but in reality a less solid...

Daisy 753S review:- https://hardairmagazine.com/reviews/daisy-avanti-753-match-target-air-rifle/

Yep, that one’s not too bad. Get those grips sorted! Andy @ Airgunner177 does very decent wooden ones if you want to go down that route.

I've never really given that much consideration and haven't thought of doing this. But you are probably correct, if storage solutions allow. Many of...

All good information in those earlier posts and that's how I've understood it for years. Yes, much more critical for shotguns with the instinctive...

To preserve the breech seam, I store my break barrel open. For the same reason I keep a spacer between barrel and under level on my hw77

The Sleepometer for the July Bash is up and running, peeps.:oldwink::) 59 to go!:) Sorry Pauly, we're below your magic number, but give me a...

Managed to sneakily watch a few YT disassembly videos last night and that perennial favourite of mine, the 1377 platform, scores so highly as regards...

Yes. It will, cheers. Quite a few to be found (generally of the more pricey target ones) and I've made the odd note of one or two over the years.

Sounding good, Eric.:) Do let us know how it goes for you.

Oops. Sorry, I hadn't read this prior to replying to Brad3's post, but we're thinking along the same lines.:oldwink:

Absolutely. It is such a shame. I was saying the other day at The Bash, a two-pump one - say 7ft.lbs on one pump and 11 on two would have been...