Activity Stream

But its not just the choke if you push a pellet through a barrel, you can feel any tight or loose spots before you get to the choke.

I shoot some pellets into a roll of foam and check the rifling marks, if they look good then I'll only run a pellet through the barrel with a...

Best not to it will turn you off the gun :oldgrin: The barrel is the main part of the gun and its nice to know its not a lemon:)

I have never done this with any barrel ever. :oldgrin:

I have no accuracy issues at all but it must be losing power with certain pellets and who wants tight spots in their barrel anyway :oldeek:

i always rod a pellet through a new barrel ,just to check for tightness or burr's on the pellet .

if there are accuracy issues, then i check.. also look for damage..

What worries me is you talk about setting power with "the heaviest pellet you use" where to be legal sub 12 it must be under 12fpe with EVERY pellet,...

Shot cycle for my HW95L .22 at 17 FPE & cocking op is soundless until the piston latches into the trigger. https://youtu.be/bywPFmB2_ZM 5 at 25...

Payment sent Going to have to make another batch of homing pellets

I've never had dealings but he always comes across well on here and clearly has an in depth knowledge. A knowledge that's he's willing to share. The...

Thanks Neil 👍

Many thanks guys. Very humbled by all your comments. Mach 1.5

I managed to upload some photos I took of the rifle. upload images

I have a Mk2 with the exact same logo and 11mm scope grooves as well. They are the later incarnations of the Mk2.

1986 was when GAMO bought BSA....

57 ….. Ha gotcha:oldeek:

It's a very nice place, and it actually looks very inviting from the outside and I understand if they have high rent etc but prices of their...

My early 77 is the one I most regret selling. The '80's HW35 .22 is a pleasure to shoot, nearly as good as the aforementioned 77. The .177 2013...

Weihrauch is the aim and no matter how much you postulate, Hw is the game :oldwink:

First one I thought of as well

I went for the soldering iron in the end, got the grub moving perfectly. You can't drill out the grub screw, it's in line with the barrel, plus...

I've owned several, my favourite to shoot by a long way is with HW100, it's beautifully smooth and extremely quiet. If you've worked on an air...