Activity Stream

Got one, been great imho, no more messing about with bottle filling and testing plus I know its been filled with dry air from my dehumidified room.

Just remachine your piston to take a TX seal, this will put you back to standard stroke. The 25mm HW seal is 10mm in length and the 25mm TX seal...

From memory of pals that did these back in the day (I never owned one personally) they removed the buffer aspect of the head, then fitted the head...

Silly question but was the gun cocked when you put the CO2 cartridge in?

The lifespan of these compressors is a bit of a lottery. I bought the same model as you and it has lasted two years. It seems mechanically OK and I...

That’s exactly what happened. Unfortunately I haven’t got a lathe :oldgrin. I was going to ask Mick T20 to have a go at straightening it up for me....

Methinks these grips are rarer than Unicorn droppings!

Dave is 100% correct. Original 66 rifles at modest prices come up from time to time for example. If you MUST use a recoilling HW for this...

Leak is definitely from the valve itself? (not just the seal twixt capsule and valve?). If you are going to strip the valve itself, best off changing...

Was machined to take a HW seal, unfortunately when machining left the top of the piston as the top. So when the seal was put on it raised it by...

A new pawl fixed it! The sharp corner of the original pawl was rounded But now the valve has developed a slow leak...

That’s what I would do bud, they’re a pain to split the cigar tube so have a look online and I had best results using scope mounts around it to give...

Just had a look at my Supersport & I've another idea on filling the old holes up. Wooden dowel is usually beech, just enlarge the holes to the next...

I have had parts directly from Germany via HC then via my local gun shop. They just can take up to 6 weeks depending on the current delivery...

I had to buy a set of punches to do mine, not a lot of money on the bay & they'll come in handy for other guns.

:oldgrin::oldgrin::oldgrin: A few short months from now....

Without a price, so now deleted Lee. :oldwink:

https://images.app.goo.gl/ZPQtKE6EdVY66Np26

One just popped up in sales

By way of wrapping this thread up. Today I disassembled the gun again and extended the cocking lever slot in the piston rearward by 3mm leaving a...

Yes maybe selling it is the fix I am after. Nice reticle though.

Poland is only over the way, that pistol had to come from Drulovia a bit to the south. Order now before Putin sends his tanks in and interrupts...

Thanks! I was thinking we could gather credible dimensions of what each supplier has, so we know where to go for what we want/need for a project. ...

yeah, that ball or rather it's seal is always what fails. it's an easy repair if you can find one... there's one (the cylindrical seal) on e6ay from...