Page 12 of 12 FirstFirst ... 2101112
Results 166 to 169 of 169

Thread: Spring Gun Tuning

  1. #166
    Join Date
    Jul 2020
    Location
    Chesterfield
    Posts
    638
    I'd stick with moly.

  2. #167
    Join Date
    Sep 2014
    Location
    ossett
    Posts
    831
    red lithium grease is used to stop the twang by blathering it on the spring

  3. #168
    Join Date
    Jul 2023
    Location
    London
    Posts
    4

    Thumbs up Spring Gun Tuning

    Great thread and many thanks to all for the great tips and advice.

  4. #169
    Join Date
    Sep 2015
    Location
    Stroud
    Posts
    295

    Lubricants

    I have spoken at some length with Tony Leach about the best lubricants and he recommends a tiny amount of silicon oil+STP blue+WS2 for the inside of the compression tube of HW77s/TX200's and other sliding compression tube airguns.

    For standard spring guns a smidge of STP blue+WS2 is good for lubricating the piston seal in the compression chamber.

    For metal to metal a light coat of high moly paste(50% plus)/light grease is a highly recommended option.

    Tony Leach makes a very good point of advising against super thick greases where tolerances are close(such as the inside of the spring guide) as the grease may grab and cause inconsistent/low velocities.

    Well supported springs do not need masses of heavy grease.

Similar Threads

  1. Spring gun tuning
    By two screws in forum General Airgun.
    Replies: 6
    Last Post: 07-02-2009, 01:20 PM
  2. Spring compressors for a, er, spring change
    By pgakister in forum General Airgun.
    Replies: 18
    Last Post: 28-01-2009, 09:49 PM
  3. Shortening a Spring Gun's Spring ...
    By Gungeek in forum General Airgun.
    Replies: 7
    Last Post: 27-06-2006, 11:57 AM
  4. Spring has Spring care of Robin!!
    By ora8i in forum General Airgun.
    Replies: 0
    Last Post: 12-06-2006, 06:37 PM
  5. tuning a gun to a pellet (no tuning tips here)
    By hip shooter in forum General Airgun.
    Replies: 4
    Last Post: 12-12-2004, 02:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •