Results 1 to 15 of 71

Thread: SILICONE OIL DAMAGE Part2

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    craigw Guest

    SILICONE OIL DAMAGE Part2

    Just wanted to say a very big thank you to Ben Taylor

    As you may recall I purchased a brand new air rifle from Ben Taylor & Son about four weeks ago, after having it for a week I applied a modest amount of Silicone Gun Oil to the metal surfaces of the rifle, I also put a few drops on the magazines and wiped it in with a rag. The next time I used the rifle after approximately 20 shots I noticed the action was stiff (I now believe the pellet probe had picked up some silicone oil from the magazine). I then applied a couple of drops to the cocking mechanism and a couple to the pellet probe which I believed to be stiff. I then fired 8 shots and noticed the action was now very stiff after only six more shots the whole action was seized solid.

    I returned the rifle to Ben Taylor who recognised the damage was caused by the silicone oil, I found this very hard to believe however he assured me this was the case and the only thing we could do was to order new parts from the air rifle manufacturer in Sweden.

    These parts were supplied this week and the rifle was thoroughly cleaned by Ben and reassembled. However, this oil seems to be almost impossible to remove once applied and despite a day of Ben’s best efforts the rifle is once again seized. Ben organised a demonstration this afternoon at his workshop which involved revolving a steel bar in his lathe and then winding another piece of steel against its side. With no lubrication at all the two pieces of steel slide together but once a few drops of silicone oil was applied the steel immediately started to be worn away in a very disturbing manner. Clear evidence if any were needed at the instant destructive ability of this oil on sliding metal surfaces.

    On the reverse of the bottle there are two parts of the description I would like to bring your attention to.

    “A light overall application gives lasting protection to all metal and wood surfaces of all guns.” This would seem a little inaccurate as it does NOT give lasting protection to all metal surfaces.

    Secondly “Do not use alone as a lube between metal surfaces” this would indicate it can be used in conjunction with other lubricants, however in the case of my rifle and in our test this is also inaccurate. The silicone oil got under the grease on the rifle and the application of normal mineral oil to the steel in our experiment did not improve the situation.

    I have now been left with no choice but to purchase another rifle from Ben Taylor which has left me many hundreds of pounds out of pocket not to mention the amount of Ben’s precious time in trying to repair the original rifle which has also cost him dearly.

    Despite this Ben sold me the replacement rifle at a reduced rate which is something he didn’t have to do considering the grief and aggravation I have caused him, and so I post this for only two reasons.

    So others may avoid such an expensive mistake.

    And to thank Ben for his time, effort and kindness and for being an absolute top bloke throughout . If your looking for absolute first class service not to mention top notch kit give him a go you won’t be disappointed.

    ATB Craig.

  2. #2
    bennyblanco Guest
    gutted for you mate



    Ben and Daniel are top blokes when it comes to after sales care and i would recomend the shop to anyone.


    you should do some pics of the damage to serve as a warning (and so we can have a )


    ben

  3. #3
    Join Date
    Mar 2006
    Location
    Twixt Dartmoor and Exmoor, Devon (Tiverton way)
    Posts
    34,695
    Would you like to sell me the remains of the gun?
    Beware the fury of a patient man... John Dryden (1631 - 1700).

    My foxing website: www.foxonic.com

  4. #4
    Join Date
    Jan 2006
    Location
    kings lynn Norfolk
    Posts
    1,023
    Quote Originally Posted by Paddy_SP View Post
    Would you like to sell me the remains of the gun?

    My part tin of SILICONE OIL is up for grabs !

  5. #5
    Join Date
    Nov 2004
    Location
    Cambridge
    Posts
    718
    Sheeeeeesh.


    B.

  6. #6
    Join Date
    Apr 2005
    Location
    Hemel Hempstead
    Posts
    1,222
    Thats a very cautionry tale mate . Not only has this cost you a lot of dough , you`re never going to be allowed to forget this by your shooting "buds".

    Andy
    A wise man has something to say, a fool has to say something.

  7. #7
    laity is offline Dumb “Platinum” Blonde
    Join Date
    Aug 2005
    Location
    Braintree...well near ish
    Posts
    3,374
    Craig

    I am very glad that this matter is sorted,i know this has caused some "ribbing" of sorts and that will not stop...for a very long time .
    Seems Ben is the "Man" and the part he played was top notch. Its always good to hear of a quality service and a decent bloke.

    Long live Ben T and Son

    laity
    Lots and lots of guns !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •