From what I can remember the back block just unscrews.
John Knibbsmay be able to provide spares.
HTH
Ian
Does anyone out there know how to remove the trigger block from a BSA Cadet major cylinder. Is there a pin to knock out ? or does it just unscrew. Also does anyone still stock spares for this rifle
Regards
Andy
From what I can remember the back block just unscrews.
John Knibbsmay be able to provide spares.
HTH
Ian
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
Hi, If My memory serves me well. ! There is no pin. IE They just Unscrew.
I have about 3-4 , & some Spares,
They are pretty " Hardy " Though, What do you need, ( And say Sight,s ) They are worth as much as the gun, ??
I had some on the " Forum " At £50 No Taker,s Etc,
There in the Loft ! Cheer,s
Your psychic powers are serving you well today
As usual the rearsight blade, screw and spring are missing with a DIY replacement.
It could also possibly benefit from a breech seal and pistonwasher
Thanks for the advice on the trigger block
regards
Andy
Hello Andy,
This may help
http://www.gunspares.co.uk/showcatimage.asp?id=24289
Chambers do sell spares as well. The above is a diagram of the Cadet and by the looks of it the back trigger block screws off.
Hope this helps
Regards
Dave (www.kwacs.org.uk) "Wildfowlers do it in the mud"
Thanks for that chaps
Most helpful.
regards
Andy