You used to be able to buy metal ones as I always found the plastic blade bent when using
Pete
Mine is a 2 piece, hardend steel through which the pin goes and that egages the sear and a plastic blade thats attached witha spit pin and the main pin.
Now does anyone make a brass replacment for the plastic part or would it be a difficult job DIY ?
Andy
1956 BRNO Mod 2E .22LR
19?? W.W.Greener GP 12g
1974? BSA Mercury Mk2 .177 (Repair/rebuild project)
You used to be able to buy metal ones as I always found the plastic blade bent when using
Pete
Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in
Exactly why i'm asking mine bends slightly too. plus Im getting the triger block repainted but leaving the trigger guard as polished alloy (albiet under a coat of laquer), so fancied a bit of bling.
Andy
1956 BRNO Mod 2E .22LR
19?? W.W.Greener GP 12g
1974? BSA Mercury Mk2 .177 (Repair/rebuild project)
can anyone suggest where i would obtain a piece of brass large enough to make a trigger blade out of ?
Thanks
Andy
1956 BRNO Mod 2E .22LR
19?? W.W.Greener GP 12g
1974? BSA Mercury Mk2 .177 (Repair/rebuild project)
Excellent Idea .
Andy
1956 BRNO Mod 2E .22LR
19?? W.W.Greener GP 12g
1974? BSA Mercury Mk2 .177 (Repair/rebuild project)