Reply With QuotePm incoming!!!!!!!!!!!!!!!!!!!
Ancient Member
Hi Folks, i may have a .22 Innova for spares, depending on if i can get hold of a couple of missing obsolete parts.
If i can't source these parts do any of you guys need spares?
List them here if you do so i'll know if it's worth my time breaking the gun down or just putting it to one side for now.
If there is sufficient interest i will make a list here and put prices on the components.
"..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.."
Registered User
Pm incoming!!!!!!!!!!!!!!!!!!!
Ancient Member
Thanks for the PM's offering me help finding the parts i need.
I need the following....
A Trigger. The one fitted looks like a home-made effort (Good but no adjuster screw fitted)
Trigger adjustment screw and spring.
The steel shim that fits between the plastic reciever and cylinder.
The spring loaded plastic cup that fits in the reciever under the trigger sear.
Piston head seal, this one is the most knackered i've seen!
Rear assembly nut (N082 on Chambers)
The bolt that goes through the above nut and hold the air cylinder and action in place.
spare exhaust and inlet springs.
Some of these parts are available on Chambers, the ones highlighted in red are not.
"..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.."
Registered User
another pm inbound
Posting Permissions