Hi,
I am looking to purchase either Webley Tempest or Hurricane.
I ahve seen more favourable comments regarding the .177 versions but are the .22's that bad ?
What is the main differences between each caliber ?
Thanks,
Mars
Hi,
I am looking to purchase either Webley Tempest or Hurricane.
I ahve seen more favourable comments regarding the .177 versions but are the .22's that bad ?
What is the main differences between each caliber ?
Thanks,
Mars
There is NOTHING at all wrong with the 0.22 version. Personal view is that it has a bit more of a "kick" but then that is often what people like.
You do of course get into the debate about 5.5mm or 5.6mm bore and, if you have the latter as I do, then there is more debate about sourcing an appropriate pellet
I suppose more than anything the selection of bore depends on your intended use of the pistol. If it is mainly target work then 0.177 is probably better because the pellet trajectory will be flatter over a typical target range. If the intended use majors on tin can plinking and maybe some ratting then in my view the 0.22 will be more rewarding
Tony
Nothing wrong...except it is a .22 330fps compared to the .177 at 420fps.
I have usual solution, one of each.
More important to buy a good one than calibre IMO.
You shouldn't try to kill anything with the .22 and the .177 is not exactly an efficient target pistol.
HOWEVER - they are both great FUN as plinkers and fun target pistols. The last of the original Webley and Scott overlever designs they are well worth having.
Get a Typhoon as well- after all that's only six pistols if you go for one of each calibre!!!
Seriously I love them.
There is no such thing as a bad one unless its been abused as long as it looks ok not to old and crabby. if the power is down a bit just take it appart and give it a good clean if you like you can replace the spring and the white plastic thing on the plunger and most important no greas or oil but lots of black molly paist. I love my old .22 premier and with lots of practice you can get 10p groopings at 6m I have never got on so well with the .177 version but lots of folk swear by them.
Occu. These pistols have plastic parts unlike early Webleys. Plastic body parts can split and crack especially when they are dismantled. So look for this.
Bent barrels, missing breech seal, barrels that move when shut,dents in the crown of the barrel are common.
The gun should cock smoothly with reasonable effort. Too much often means silly over power spring fitted or other problems. Too little means worn out.
They can be sorted and parts are available, but bashing out the pins can crack plastic as above.
You will know a good one when you see it.