Results 1 to 15 of 30

Thread: Nite site ns50

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2011
    Location
    Crowborough
    Posts
    79

    Nite site ns50

    Bought one of these a couple of weeks ago and used it last Friday. I have to say the sight picture out to 70 yards is vastly superior to gen 1 stuff . You can pick your aim point brilliantly whereas with gen 1 stuff you can only really aim for the eye. The big screen that shows the picture casts a lot of light back into your face but it didn't seem to spook the rabbits. Setting up the camera to show the scope recticle is however fiddly, either use long nose pliers or borrow the hands of a small child, sausage fingers are of no use at all for this job. All in all I have found this tool super.

  2. #2
    Join Date
    Feb 2006
    Location
    SW Birmingham (Rubery Rednal)
    Posts
    1,670
    Thanks for the review.

    Re. focusing the reticle: Phil at Nite Site tells me that the lenses came from the factory fully tightened, which is why you need pliers (or a small child!) to adjust the focus. However, once freed off, the lens housing should turn easily enough thereafter with just finger pressure.

    It worked for me.

  3. #3
    Join Date
    Mar 2010
    Location
    mountain ash
    Posts
    8,662

    about above

    hi have been looking at one of these but have seen lots of bad feedback but glad you find it ok as i was changing my mind , so will be thinking now ok cheers

  4. #4
    Join Date
    Apr 2008
    Location
    HARLOW
    Posts
    3,285
    i got the ns200 so far seems good and yes much much better than a gen1 i dont have much spare money so was a big decision and im pretty happy so far i am also going to invest into a recorder for it also, if you ever near harlow essex im happy to show you it
    sorted

  5. #5
    Join Date
    Jan 2006
    Location
    Eastern Leicester city Boundary
    Posts
    4,274
    Does anyone have a decent photo of the part we need pliers or kiddy fingers for please?
    For NV spotter and add-on videos, paste > some bloke night vision < into YouTube search bar

  6. #6
    Join Date
    Sep 2009
    Location
    Exmouth
    Posts
    36
    Quote Originally Posted by some bloke View Post
    Does anyone have a decent photo of the part we need pliers or kiddy fingers for please?

    Hi Buddy.


    I have the ns200, and very, very impressed and happy with it.
    On the camera module, inside the plastic housing that goes onto the rubber tube, you will see a small metal tube, inside which the camera eye sits.
    To focus the reticule you turn this....but.....before you stick pliers in there, try a bit of rubber inner tube or the like, place it on the top and turn with your thumb, hopfully it will move, mine did !!
    If it dosnt...go get the pliers

    ATB.


    Bill.
    Last edited by Sweeney-Todd; 27-01-2012 at 04:52 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •