Results 1 to 8 of 8

Thread: Funnels

  1. #1
    Join Date
    Sep 2006
    Location
    Driffield, East Yorkshire
    Posts
    3,055

    Funnels

    Just a heads up.

    I bought a couple of funnels from wayne.q on here, he advertised .22 Hornet and .243 so I pm'd him about a .204 funnel, sent him OD/ID and neck length and he 3d printed one for me.

    Arrived this morning, nice design, the centre spigot sits inside the neck and there is an outer collar that sits around it.

    Clicky

  2. #2
    Join Date
    Nov 2009
    Location
    sunderland
    Posts
    257
    pleased you happy with them
    cheers wayne

  3. #3
    Join Date
    Dec 2012
    Location
    The Valleys of South Wales
    Posts
    1,816
    Quote Originally Posted by wayne.q View Post
    pleased you happy with them
    cheers wayne
    What printer do you have? I've almost talked the missus into buying me one. I'm looking at the creality ender 3 to start off, but know nothing about them.
    DesG
    "Si vis pacem, para bellum !"

  4. #4
    Join Date
    Nov 2009
    Location
    sunderland
    Posts
    257
    I use an ender 3 but its been modified a lot
    if your thinking of getting one do plenty of research on youtube ,its easy getting one to print but getting one to print well takes time and patience
    you end up with a lot of half completed items!!

  5. #5
    Join Date
    Dec 2012
    Location
    The Valleys of South Wales
    Posts
    1,816
    Quote Originally Posted by wayne.q View Post
    I use an ender 3 but its been modified a lot
    if your thinking of getting one do plenty of research on youtube ,its easy getting one to print but getting one to print well takes time and patience
    you end up with a lot of half completed items!!
    Yes, the more I look the more confused I get. Worse than buying a new gun! Still, plenty of time on my hands.
    DesG
    "Si vis pacem, para bellum !"

  6. #6
    Join Date
    Nov 2009
    Location
    sunderland
    Posts
    257
    that's how I learnt!
    and by my mistakes!

  7. #7
    Join Date
    Oct 2003
    Location
    Fishtoft
    Posts
    1,389
    Would a printed funnel be made from plastic and consequently prone to static?
    I use aluminium funnels so kernels don't stick due to static.
    To destroy a people, you must first sever their roots. Aleksandr Solzhenitsyn

  8. #8
    Join Date
    Dec 2008
    Location
    sunderland "north east"
    Posts
    6,020
    Quote Originally Posted by Rickee View Post
    Would a printed funnel be made from plastic and consequently prone to static?
    I use aluminium funnels so kernels don't stick due to static.
    A quick wash in hot water usually gets rid of any static

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •