PP700W pistol

[rockdrill]

Does anyone have any tips for an effective rest for zeroing, I get it that I will never be able to do it accurately freehand.

One nice point about the PP700 is that you can get 95% of the way to being zeroed by bore sighting it as with the breech-block in the open position and the hammer cocked you can see straight through the bore.

With the pistol in a solid rest line the bore on the target and adjust your sight to intersect what the bore is pointing at.

Keeping your groups tight just comes down to practice.

[forbs]

first mod to the gun new weihrauch barrel, screw cut for a moderator its almost silent

http://i423.photobucket.com/albums/p...psyipddinx.jpg

http://i423.photobucket.com/albums/p...psi0xfyvqv.jpg

with weihrauch silencer

http://i423.photobucket.com/albums/p...psppocsrmw.jpg

[Waisted]

Well I picked up my second pp700 on Friday afternoon from Guns and Roses in Dewsbury, this time I got a .177 to match the .22 . To say that I am happy is an understatement these pistols are the dogs bollocks and a great price at £150 each. Also picked up a couple off decent shirts for a good price, a good little gun shop if ever you are in the area.

[buttloaves]

http://i1128.photobucket.com/albums/...oors%20121.jpg
http://i1128.photobucket.com/albums/...oors%20122.jpg

Fitted with Crosman stock, makes a great little ratter.

[buttloaves]

http://i1128.photobucket.com/albums/...oors%20121.jpg
http://i1128.photobucket.com/albums/...oors%20122.jpg

Fitted with Crosman stock, makes a great little ratter.

Ive said this before, if SMK could deliver this gun with plastic stock, slightly longer barrel, sub 12fpe, under £300 they'd have a winner..

[Waisted]

Butt loaves did you have to do much alteration to make it fit the crosman stock? I have made a thumb hole stock for my .22 it helps to give it good accuracy, it is far superior to the small brocock rifle That I got rid of.Infact I would say it's better than quite a few rifles that I have had, so simple and easy to work on. Thankfully I had an air cylinder otherwise these pistols would have passed me by, they have reignited my fun button.

[gtfreight]

Has anyone found out if it's possible to adapt iron sights to fit this pistol?
If so, I would buy one in an instant.

[buttloaves]

Butt loaves did you have to do much alteration to make it fit the crosman stock? I have made a thumb hole stock for my .22 it helps to give it good accuracy, it is far superior to the small brocock rifle That I got rid of.Infact I would say it's better than quite a few rifles that I have had, so simple and easy to work on. Thankfully I had an air cylinder otherwise these pistols would have passed me by, they have reignited my fun button.

It was fairly easy, i wrapped the pistol grip with masking tape and filled it with black epoxy resin, then i drilled a 22mm hole down into it to take the spring housing of the pistol, after that it was just a case of slotting the 2 together and removing plastic where necessary with a dremel untill i got it where it felt right.
Snot perfect but it'll do and it's very solid..

[titeuf007]

first mod to the gun new weihrauch barrel, screw cut for a moderator its almost silent

http://i423.photobucket.com/albums/p...psyipddinx.jpg

http://i423.photobucket.com/albums/p...psi0xfyvqv.jpg

with weihrauch silencer

http://i423.photobucket.com/albums/p...psppocsrmw.jpg

dear forbs
could you say me if it s 16mm hw barrel?
i would like to make the same thing than you
do you obtain better accuracy?

[titeuf007]

first mod to the gun new weihrauch barrel, screw cut for a moderator its almost silent

http://i423.photobucket.com/albums/p...psyipddinx.jpg

http://i423.photobucket.com/albums/p...psi0xfyvqv.jpg

with weihrauch silencer

http://i423.photobucket.com/albums/p...psppocsrmw.jpg

do you use 16 od hw barrel.?
i would like to buy one but there are 2 sizes..16 or 14mm